Stem length from mirror body to bend: 150mm. From bend to end of thread: 60mm. Replacement aftermarket part for the following OEM numbers:Ka...
Both mirrors have 10mm right-hand thread x standard pitch of 1.25mm. Glass outer diameter 95mm. Total outer diameter 105mm. 140mm stem lengt...
Non-asbestos. Outer diameter 42mm. Inner diameter 34mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
These mirrors will fit any bike with an 8mm or 10mm right hand thread (clockwise) each side, left or right. Stem length: 190mm centre to cen...
Inner diameter 37mm. Outer diameter 49mm. Thickness 8mm plus 2.5mm lip. Replacement aftermarket part for the following OEM numbers: Harley D...
Glass outer diameter 110mm. 190mm stem length from centre of mirror to bend. 50mm from bend to end of thread. E-marked. Replacement aftermar...
Steel sprocket. ID including splines: 21.7mm. OD without splines: 25mm. Width: 9mm. Bolt hole centres: 42mm. Chain pitch: 530mm. Replaces JT...
Outer diameter 52mm. Inner diameter 30mm. Width 8mm.
Inner diameter 37mm. Outer diameter 49mm. Thickness 13mm.
Outer diameter 39mm. Inner diameter 35mm. Width 32mm.
Outer length: 1120mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Inner overhang: 76mm. Inner top nipple: barre...
Note: The original relay for many of the Suzuki models (OEM #38610-45031) have the terminals pointing down but this one has the terminals or...
Note: Some GSF400 Bandit 1991-93 models use a push-in type cable at wheel therefore use our SKU: 015943. Length: 36" (920mm). Clock fit...
Replacement aftermarket part for the following OEM numbers: Suzuki 57620-49101, 57620-49100. Yamaha 5Y1-83912-00, 3FY-83912-00, 3FY-83912-01...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
Outer diameter 34mm. Inner diameter 6mm. Width 7.5mm.
The D.I.D ZVM-X Series utilizes our patented X-Ring seal and has greater strength than the VX Series and is designed for heavyweight motorcy...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 530VX...
Diaphragm 37mm x 37mm. Made in Japan.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Brand cross reference: Vesrah VD327, 63, Ferodo FDB338/R, SBS 526. You may need more than a single pair of pads if you have twin discs. Gold...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
