Outer diameter 40mm. Inner diameter 25.5mm. Thickness 1.5mm.
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Suitable for fork seals with 58mm outer diameter. Thickness 1.6mm. This will suit the following models as well as those listed in fitments: ...
2 bolt hole type. 42mm between bolt hole centres.
Made in Japan.
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one. Materi...
Replacement aftermarket part for the following OEM numbers: Honda 34901-MAT-611, 33110-S1A-G51, 33110-SMG-E01HE, 34901-KEY-700, 34901-MGZ-J0...
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Kelvin is a measurement by colour temperature of the colour produced to a halogen bulb. Colour temperature refers to how warm or cool a bulb...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
Made in Japan. This set includes the following items: 1 x bearing OD 24mm x ID 17mm x length 26mm. 1 x shaft OD 17mm x ID 10mm x length 30mm...
Voltage: 12v. Wattage: 3.4w. Base width: 8mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 capless ...
Piston outer diameter 38mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
As used in motorcycle and other auto vehicle speedo, tacho clocks, dashboards, rear lights, marker lights, indicators. Base width: 9.3mm. Gl...
Inner diameter 43mm. Outer diameter 55mm. Thickness 13.5mm.
Thread: 14mm. Pitch: 1.25mm. Length: 20mm. Plug with copper washer for the oil pan. Washer: 14mm x 19.2mm x 2.00mm. Replacement aftermarket ...
Piston outer diameter 38mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
Inner diameter 43mm. Outer diameter 55mm. Thickness 9.5mm.
Made in Japan. Replaces Suzuki 59667-04700.
This oil filter remover will only fit filters supplied by Motorcycle Products.
The AX in BAX15s denotes that the pins are angled at 150 degrees, unlike BA15s (where the pins are directly opposite). Features of BAX15s. P...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Outer diameter 34mm. Inner diameter 6mm. Width 10mm.
Koyo 62/32-DDU/2RS 62/32-2RS-C3. Inner diameter 32mm. Outer diameter 65mm. Width 17mm. Made in Japan. Replacement aftermarket part for for t...
Outer diameter 48.5mm. Inner diameter 43mm. Width 20mm.
