Outer diameter (including teeth) 144mm. Outer diameter (excluding teeth) 132mm. Inner diameter: 118mm. Thickness: 2.8mm. Number of pegs: 12....
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. 0.7-0.8mm gap. Genuine NGK spark ...
Outer diameter 133mm. Thickness 2.3mm. Number of pegs 28.
Outer diameter 133mm. Thickness 2.7mm. Number of pegs 28.
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Cylinder head to rocker box mounting rubber. Outer diameter 25.5mm. Inner diameter 11mm. Thickness 2mm. Replacement aftermarket part for Suz...
Made in Japan.
Inner diameter 30mm. Outer diameter 55mm. Width 1.5mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600063.
Fits cam chains supplied by us only.
Kit contains a pair of fork oil seals.
Voltage: 12v. Wattage: 1.7w. Base width: 5mm. Width of glass: 6.5mm. Maximum length: 21.8mm. Uses of Medium T6.5 Capless Wedge Bulbs. Medium...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 15mm. Thickness 2mm.
Outer diameter 22mm. Inner diameter 14mm. Width 5mm.
Outer diameter 34mm. Inner diameter 6mm. Width 10mm.
Made in Japan. Replaces Suzuki 59667-18441, 59667-18440.
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. This kit contains an inner oil seal...
Piston outer diameter 30mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Piston outer diameter 38mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...
Outer diameter 41mm. Inner diameter 32mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Piston outer diameter 34mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Made in Japan. Fit Japan...
This kit includes the following bearings: Bearing 1: ID 30mm x OD 55mm x Thickness 17mm. Bearing 2: ID 30mm x OD 55mm x Thickness 17mm.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 30mm x OD 55mm x Thickness 17mm. Bearing 2: ID 30mm x OD 55mm x Thick...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Outer diameter 41mm. Inner diameter 32mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
