Includes the electric fuel pump and parts needed to service or rebuild the factory fuel pump module - check image/s. Works Racing Parts (WRP...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Kit contains a pair of fork dust seals.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-166-016.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Outer diameter 40mm. Inner diameter 25.5mm. Thickness 3mm.
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Replacement aftermarket part for the following OEM numbers: Honda: 34901-MAT-611, 33110-S1A-G51, 33110-SMG-E01HE, 34901-KEY-700, 34901-MGZ-J...
Kelvin is a measurement by colour temperature of the colour produced to a halogen bulb. Colour temperature refers to how warm or cool a bulb...
Voltage: 12v. Wattage: 3.4w. Base width: 9.5mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 caples...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter: 30mm. Outer diameter: 55mm. Width: 17mm. M...
Smallest of the two mechanical water pump seals fitted in mainly Suzuki models. Outer diameter 24mm/29mm. Inner diameter 11.15mm/22.5mm. Wid...
For the Moto Guzzi MGS-01 Corsa (1225cc): Two bearings are required for the front wheel and two for the rear wheel. Koyo: 6005DDU, 6005-2RS-...
Thread diameter 49mm. Supplied with diaphragm, O-ring and screw. Made in Japan. The O-ring is not used on Suzuki models.
Outer diameter: 52mm. Inner diameter: 32mm. Width: 7mm. Replacement aftermarket part for the following OEM numbers: Kawasaki 92049-1287, 920...
Koyo 6205DDU. DDU version of 2RSHC3HMTF7. Double sided rubber sealed. Outer diameter: 52mm. Inner diameter: 25mm. Width: 15mm. Made in Japan...
The AX in BAX15s denotes that the pins are angled at 150 degrees, unlike BA15s (where the pins are directly opposite). Features of BAX15s. P...
Koyo 62/32-DDU/2RS 62/32-2RS-C3. Inner diameter 32mm. Outer diameter 65mm. Width 17mm. Made in Japan. Replacement aftermarket part for for t...
