Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Includes the electric fuel pump and parts needed to service or rebuild the factory fuel pump module - check image/s. Works Racing Parts (WRP...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Outer diameter 40mm. Inner diameter 25.5mm. Thickness 3mm.
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
Made in Japan. This set includes the following items: 1 x bearing OD 24mm x ID 17mm x length 26mm. 1 x shaft OD 17mm x ID 10mm x length 30mm...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. 22mm ID. Replacement aftermarket part for Kawasaki OEM 49006-...
Voltage: 12v. Wattage: 3.4w. Base width: 8mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 capless ...
Piston outer diameter 38mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
As used in motorcycle and other auto vehicle speedo, tacho clocks, dashboards, rear lights, marker lights, indicators. Base width: 9.3mm. Gl...
Piston outer diameter 38mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
Thread diameter 49mm. Supplied with diaphragm, O-ring and screw. Made in Japan. The O-ring is not used on Suzuki models.
The AX in BAX15s denotes that the pins are angled at 150 degrees, unlike BA15s (where the pins are directly opposite). Features of BAX15s. P...
Single bolt hole mount. Outer diameter 75mm. 100 dB. Made in Japan. All buyers please be aware that all horns/hooters supplied by us are mar...
Koyo 62/32-DDU/2RS 62/32-2RS-C3. Inner diameter 32mm. Outer diameter 65mm. Width 17mm. Made in Japan. Replacement aftermarket part for for t...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Outer diameter 34mm. Inner diameter 6mm. Width 10mm.
Made in Japan. Replaces Suzuki 59667-18441, 59667-18440.
Outer diameter: 52mm. Inner diameter: 32mm. Width: 7mm. Replacement aftermarket part for the following OEM numbers: Kawasaki 92049-1287, 920...
22mm bore size. 140mm length, which is a vertical straight line from inside centre of bore to the inside centre of toe peg.
Outer diameter: 21mm. Inner diameter: 10mm. Width: 5mm. Replacement aftermarket part for following OEM numbers: Honda 91204-HP1-601, 91204-H...
Koyo 60/28-DDU/2RS 60/28-2RS-C3. Double sided rubber sealed. Outer diameter 52mm. Inner diameter 28mm. Width 12mm. Made in Japan. Replacemen...
