Koyo 6205-DDU/2RS 6205-2RS-C3. Inner diameter: 25mm. Outer diameter: 52mm. Width: 15mm. Made in Japan.
Please Note: These are not suitable for flat sided Keihin carbs. Made in Japan. Replacement aftermarket part for Suzuki OEM 13507-17C00, 135...
2 bolt hole type. 42mm between bolt hole centres.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 43mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Inner diameter 43mm. Outer diameter 54mm. Thickness 11mm.
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Inner diameter 43mm. Outer diameter 54mm. Thickness 13mm.
Koyo 6204-2RS-C3. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan. Replacement aftermarket p...
Upper or Lower depending on whether standard or USD forks. Outer diameter 47mm. Inner diameter 43.1mm. Width 15mm. Thickness 1.95mm. Replace...
Stem length: 90mm. Thread length: 24mm. Thread pitch: M10 (10mm) x 1.25mm. Robust, lightweight, and weather resistant. Complete with bulbs a...
Piston outer diameter 38mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Thread: 14mm. Pitch: 1.25mm. Length: 20mm. Plug with copper washer for the oil pan. Washer: 14mm x 19.2mm x 2.00mm. Replacement aftermarket ...
Piston outer diameter 38mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
Stem length: 47mm. Thread length: 13mm. Thread pitch: M10 (10mm) x 1.25mm. Robust, lightweight, and weather resistant. Complete with bulbs a...
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
Outer diameter 22mm. Inner diameter 12mm. Width 9mm. Replacement aftermarket part for the following OEM numbers: . Suzuki 09285-12002, 09285...
Replacement aftermarket part for Suzuki OEM 35612-17C20, 35652-17C20.
Thread diameter 49mm. Supplied with diaphragm, O-ring and screw. Made in Japan. The O-ring is not used on Suzuki models.
This oil filter remover will only fit filters supplied by Motorcycle Products.
RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...
Non-asbestos. Outer diameter 42mm. Inner diameter 34mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Steel sprocket. ID including splines: 21.7mm. OD without splines: 25mm. Width: 9mm. Bolt hole centres: 42mm. Chain pitch: 530mm. Replaces JT...
Piston outer diameter 34mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Piston outer diameter 34mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
