Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Alloy brake lever. Replacement aftermarket part for Suzuki OEM 57300-11320, 57420-11300, 57420-11320, 57420-11322, 57420-45010.
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Steel sprocket. Replaces JT Sprockets JTR810-47.
Outer diameter 52mm. Inner diameter 20mm. Width 8mm.
Steel sprocket. Replaces JT Sprockets JTR810-43.
Steel sprocket. Replaces JT Sprockets JTR810-46.
Outer diameter 52mm. Inner diameter 26mm. Width 7mm.
Steel sprocket. Replaces JT Sprockets JTR810-42.
Steel sprocket. Replaces JT Sprockets JTR810-50.
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF1263.17. Type: Standard. Material: Steel. Fitment: Direct replacem...
12v ignition coil. 2 spade terminals. Fits front or rear on V-twins. Fits left or right on twins. Centre-to-centre distance between mounting...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF1263.14. Type: Standard. Material: Steel. Fitment: Direct replacem...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
Brand: JT Sprockets. Position: Rear. Tooth Count: 47. JT Part Number: JTR810.47. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 43. JT Part Number: JTR810.43. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 42. JT Part Number: JTR810.42. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 50. JT Part Number: JTR810.50. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
12V 7AH CCA 105. Terminals: 4 (2 positive + 2 negative). Complete with battery terminals & connections. Length: 120mm x Width: 60mm x He...
Brand update notice: US Powersports batteries are in the process of being re‑branded as MTX. While existing US Powersports branded stock r...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).