Non-resistor type. Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 19mm (3/4"). Standard 2.5mm copper core centre ele...
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating. Earth wire l...
Steel sprocket. Replaces JT Sprockets JTF424-16.
Brand: JT Sprockets. Position: Rear. Tooth Count: 42. JT Part Number: JTR816.42. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 43. JT Part Number: JTR816.43. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Steel sprocket. Replaces JT Sprockets JTF424-15.
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF424.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Outer diameter 78mm. Inner diameter 25mm. Width 8mm.
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
Replacement aftermarket part for the following OEM numbers: Suzuki 11446-31000. This will suit the following models as well as those listed ...
Clear version: For amber version use our SKU: 018214. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
With Staggered Pins.
Straight TR4 valve.
NTN 6204LLU. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.
Overall width: 32". Rise: 4". Centre width: 6". Location hole top left of bars. Reproduction Suzuki Kettle handlebars. Please...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Foam air filter pods are ideal for off-road use where there's lots of dust or mud flying about, typically in motocross racing and trails. 52...
Suitable for Suzuki GT models and Kawasaki ZXR750 ZXR400. Fit Tokico and Asco Calipers. Piston outer diameter: 38mm. Each kit contains an in...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
Genuine NGK LB05F-R red resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 48mm x Thickness 15mm. Bearing 2: ID 27mm x OD 48mm x Thick...
Round body. Body small OD 30mm. Body large OD 35mm. Length 34mm. Length + pins 46.8mm. For use with all bulbs. Includes buzzer.
Round body. Body small OD 33.5mm. Body large OD 36.5mm. Length 43mm. Length + pins 55.5mm. For use with all bulbs. Includes buzzer.
Original Daiichi DNO-20 DNO-21. Made in Japan. Replacement aftermarket part for Suzuki OEM 33261-33010, 32341-31010, 33261-32410, 33263-3302...
Important: There are two types of "4 wire" switch fitted to these Suzuki models as well as a possible "6 wire". For the ...
12 volt 12AH 210 CCA. Length: 135mm x Width: 90mm x Height: 167mm. Replaces: YTX14AHL-BS, YB14L-A1, YB14L-A, 12N14-3A, YB14L-A2, YB14L-B2, C...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 19mm (3/4"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm g...
Brand: JT Sprockets. Position: Rear. Tooth Count: 40. JT Part Number: JTR816.40. Type: Standard. Material: Steel. Fitment: Direct replacemen...
