Suzuki RM80 1981 Parts

RK 428-110L HSB Heavy Duty Gold Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

RK Pro-MX 428-110L MXZ Heavy Duty Gold Drive Chain

Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...

RK 428-110L HSB Heavy Duty Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

MTX 428HD-110 Gold Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...

40mm x 21mm x 7mm Drive Shaft Oil Seal

Outer diameter 40mm. Inner diameter 21mm. Width 7mm.

DID 428HD-110L Heavy Duty Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

47mm x 26mm x 7mm Crank Oil Seal

Outer diameter 47mm. Inner diameter 26mm. Width 7mm.

TourMax Ignition Coil Suzuki 33410-14D01 33410-09F00 33410-13E00

Single spade terminal. Single HT lead 250mm. Mounting centres: 55mm. Primary resistance: 0.9Ω. Secondary resistance: 7.0kΩ. Made in Japan....

12 Tooth Front Sprocket - 003040

Steel sprocket. Replaces JT Sprockets JTF428-12.

NGK B8EG Racing Spark Plug

Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 19mm (3/4"). Fine wire nickel alloy centre electrode. 0.7-0.8mm gap. ...

JT Sprockets 13 Tooth Front Sprocket JTF428.13

Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF428.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 14 Tooth Front Sprocket JTF428.14

Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF428.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 12 Tooth Front Sprocket JTF428.12

Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF428.12. Type: Standard. Material: Steel. Fitment: Direct replaceme...

Engine Gasket Set - 010279

This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...

Con Rod Kit Suzuki DS80 85-00 GT125 74-82 RM60 79-83 RM80 77-82

This kit includes the following parts: Connecting rod. Gudgeon pin also known as a wrist pin. Big end and small end needle bearings. Pair of...

Steering Head Taper Bearing Kit SSS100 (Japanese)

Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 45mm x Thickness 14mm. Bearing 2: ID 27mm x OD 48mm x Thick...

All Balls 25-1289 Wheel Bearing Kit

All Balls 22-1042 Steering Head Bearing & Seal Kit

Includes all bearings and seals. Heavy duty tapered roller bearings. Direct replacement for OEM bearings. Upgrade replacement for ball style...

46 Tooth Rear Sprocket JTR802-46

Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...

13 Tooth Front Sprocket - 003101

Steel sprocket. Replaces JT Sprockets JTF428-13.

14 Tooth Front Sprocket - 003219

Steel sprocket. Replaces JT Sprockets JTF428-14.