Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Brake light switch with 820mm lead length. Replacement aftermarket part for the following OEM numbers: Suzuki 57460-49100, 57460-45500, 5746...
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF1263.17. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF1263.14. Type: Standard. Material: Steel. Fitment: Direct replacem...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
Brake light switch with lead. 2 wires with bullet connectors.
For use with bulbs up to 10 watt.
Steel sprocket. ID 64mm. PCD (Pitch Circle Diameter) 84mm. Mounting holes OD 8.30mm. Number of mounting holes 6. Width 7.10mm. Tooth pitch 4...
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 8. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
Outer diameter 100mm. Thickness 1.6mm. Number of pegs 26.
Brand: JT Sprockets. Position: Rear. Tooth Count: 50. JT Part Number: JTR809.50. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Outer diameter (including teeth) 111mm. Thickness 3mm. Number of pegs 12. Replacement for Vesrah VP3021.
Brand: JT Sprockets. Position: Rear. Tooth Count: 51. JT Part Number: JTR809.51. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 49. JT Part Number: JTR809.49. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 47. JT Part Number: JTR809.47. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 53. JT Part Number: JTR809.53. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 44. JT Part Number: JTR809.44. Type: Standard. Material: Steel. Fitment: Direct replacemen...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...