Outer diameter 115mm. Thickness 1.5mm. Number of pegs 30. Replacement aftermarket part for the following OEM numbers: Kawasaki 13089-S001. S...
Stem length: 39mm. Long stem 89mm - SKU: 018919. Fits front or rear on either left or right hand side. Thread: 10mm. Replacement lens SKU: 0...
Please ensure this 36" cable is not too long for your Suzuki as you may require shorter as listed below. Shorter cable at 32" use ...
Outer diameter 19mm. Inner diameter 6mm. Width 7mm.
Outer diameter 44mm. Inner diameter 25mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Suzuki 09283-25066. and man...
Outer diameter 44mm. Inner diameter 25mm. Width 7mm.
Aftermarket black resistor spark plug cap, equivalent to NGK LB05F and designed for use with 14mm spark plugs that have an exposed threaded ...
Outer diameter 52mm. Inner diameter 26mm. Width 7mm.
Brake light switch with 820mm lead length. Replacement aftermarket part for the following OEM numbers: Suzuki 57460-49100, 57460-45500, 5746...
Brake light switch with lead. 2 wires with bullet connectors.
Steel sprocket. Replaces JT Sprockets JTF422-12, JTF421-12.
Steel sprocket. Replaces JT Sprockets JTF422-13, JTF421-13.
Steel sprocket. Replaces JT Sprockets JTF422-11, JTF421-11.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
Steel sprocket. Replaces JT Sprockets JTF422-14, JTF421-14.
For use with bulbs up to 10 watt.
Steel sprocket. Replaces JT Sprockets JTR811-45.
Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF422.12. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF422.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF422.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
Brand: JT Sprockets. Position: Rear. Tooth Count: 45. JT Part Number: JTR811.45. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 46. JT Part Number: JTR811.46. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR811.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Suitable for mirrors with part numbers 011958, 011966, 011957. And any other mirrors with 10mm right hand thread (clockwise).
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
