Outer diameter 17mm. Inner diameter 10mm. Width 5mm.
Smallest of the two mechanical water pump seals fitted in mainly Suzuki models. Outer diameter 24mm/29mm. Inner diameter 11.15mm/22.5mm. Wid...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. RK XSO Series: Designed for Basic Motorcy...
Please note: these mirrors have a plastic body with metal stem. Both mirrors have right hand thread. Glass outer diameter 110mm. 140mm stem ...
The D.I.D ZVM-X Series utilizes our patented X-Ring seal and has greater strength than the VX Series and is designed for heavyweight motorcy...
Genuine NGK LB05F black resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...
Stem length from mirror body to bend: 150mm. From bend to end of thread: 60mm. Replacement aftermarket part for the following OEM numbers:Ka...
Thread: 14mm. Pitch: 1.25mm. Length: 20mm. Plug with copper washer for the oil pan. Washer: 14mm x 19.2mm x 2.00mm. Replacement aftermarket ...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 520VX...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Total lead length: 360mm. Longer lead at 630mm use our SKU: 036776. Front or rear brake light stop switch. Push in type. 8mm diameter. 2 wir...
Both mirrors have 10mm right-hand thread x standard pitch of 1.25mm. Glass outer diameter 95mm. Total outer diameter 105mm. 140mm stem lengt...
These mirrors will fit any bike with an 8mm or 10mm right hand thread (clockwise) each side, left or right. Stem length: 190mm centre to cen...
Outer diameter: 115mm. Outer diameter (including teeth): 127mm. Inner Diameter: 96mm. Thickness: 3mm. Number of pegs: 12. Replacement afterm...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x OD 55mm x Thick...
Glass outer diameter 110mm. 190mm stem length from centre of mirror to bend. 50mm from bend to end of thread. E-marked. Replacement aftermar...
Non-asbestos. Outer diameter 55mm. Inner diameter 46mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Upper or Lower depending on whether standard or USD forks. Outer diameter 38.5mm. Inner diameter 36.5mm. Width 20mm. Thickness 1mm. Replacem...
Inner diameter 38mm. Outer diameter 50mm. Thickness 10.5mm.
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Outer diameter 23mm. Inner diameter 18mm. Length 24mm.