2 bolt hole type. 42mm between bolt hole centres.
101mm ID. 125mm OD without pegs. 136mm OD with pegs. 14mm width of peg. Number of pegs 10. 3.0mm thickness. Replacement for Vesrah VP1042. R...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Wire length: 30cm. Female bullet connectors to 2 female small bullet connectors with white outer casing.
Koyo 6205-DDU/2RS 6205-2RS-C3. Inner diameter: 25mm. Outer diameter: 52mm. Width: 15mm. Made in Japan.
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
This oil filter remover will only fit filters supplied by Motorcycle Products.
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made...
Thread: 14mm (M14). Thread pitch: 1.50mm. Plug with copper washer for the oil pan. Replacement aftermarket part for the following OEM number...
Koyo 6204-2RS-C3. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan. Replacement aftermarket p...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Inner diameter 43mm. Outer diameter 55mm. Thickness 9.5mm.
Koyo 6004-DDU/2RS 6004-2RS-C3. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 20mm. Width 12mm. Made in Japan. Replacement ...
Height 67mm. Width 69mm. Thread 20mm. Pitch 1.50mm. Replacement for Hiflofiltro HF204, HF128. This filter does not come with an O-ring. This...
RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...
Inner diameter 43mm. Outer diameter 55mm. Thickness 10.5mm.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 43mm x OD 55mm x Thickness 9.5mm x lip 10.5mm. Push-in t...
NOTE: Please compare the product images with your original lever before ordering, as some similar Triumph levers may fit but have a differen...
Dyno tested to 500,000 strokes with less wear than OEM bushings. Includes bushings, copper washers, o-rings and fork seal snap rings.
Outer diameter 52mm. Inner diameter 35mm. Width 5mm.
The D.I.D ZVM-X Series utilizes our patented X-Ring seal and has greater strength than the VX Series and is designed for heavyweight motorcy...
Brand cross reference: Vesrah VD147, 140, Ferodo FDB531, SBS 614. You may need more than a single pair of pads if you have twin discs. Goldf...
The VX Series chain is a great chain upgrade from OEM and is our most popular and widely used chain on both on and off-road bikes. The 525VX...