Yamaha DT125 RE 2006 Parts

20mm x 8mm x 40mm Gear Lever Rubbers

Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.

275/300-21 Inner Tube with TR4 Valve

Straight TR4 valve.

12V 21/5W BAY15D Stop & Tail Rear Light Bulbs (Clear)

12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...

35mm x 15mm x 11mm Wheel Bearing Koyo 6202DDU

Koyo 6202DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 15mm. Width 11mm. Made in Japan. Replacement aftermarket part ...

12V 60/55W P43t H4 Halogen Headlight Bulbs - Standard Clear

Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...

H4 Headlight Bulb Holder (Check Image)

Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...

23mm x 26mm x 54mm Exhaust Tailpipe Rubber

End 1 inner diameter 23mm. End 2 inner diameter 26mm. Length 54mm.

34mm On-Off-Reserve Fuel Tap with 5mm Side Outlet

On, off and reserve positions. 34mm between bolt hole centres. 5mm side outlet. Takes pipe with a 5mm inner diameter.

Fork Seal Circlips For 58mm OD Fork Seals 1.6mm Thick

Suitable for fork seals with 58mm outer diameter. Thickness 1.6mm. This will suit the following models as well as those listed in fitments: ...

12V 60/55W P43t H4 Halogen Headlight Bulb - Tinted Blue

12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...

41mm x 53mm x 8mm Fork Oil Seals with 9.5mm Lip 51153-27C20

Inner diameter: 41mm. Outer diameter: 53mm. Thickness: 8mm with 9.5mm lip. Replacement aftermarket part for the following OEM numbers: Suzuk...

Power Valve Cable Yamaha 3RM-1133F-00-00

Cable outer length 150mm. Replacement aftermarket part for the following Yamaha OEM numbers: 3RM-1133F-00-00.

12V 15W BA15s Indicator Bulbs

350/400-18 Inner Tube with TR6 Valve

Straight TR6 valve.

12V 23W BA15s Amber Indicator Bulbs

Hendler 34.5mm x 22mm x 1mm Crank Thrust Washers

Outer diameter 34.5mm. Inner diameter 22mm. Thickness 1mm. Material: Alloy.

940mm Speedo Cable 16M-83550-01-00 341-83550-00-00 4KM-83550-01

Length: 37" (940mm). Longer version at 1090mm use our SKU: 015979. Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square...

12V 10W BA15s Indicator Bulbs

Power Valve Cable Yamaha 3RM-1133E-00-00

Cable outer length is 135mm. Replacement aftermarket part for the following Yamaha OEM numbers: 3RM-1133E-00-00.

1090mm Speedo Cable Longer Version 16M-83550-01-00 341-83550-00

Please Note: Longer version at 1090mm for fitments & OEM numbers listed. Standard length at 940mm use our SKU: 015962. Clock fit: screw-...

12V 8W BA15s Indicator Bulbs

42mm x 20mm x 12mm Wheel Bearing Koyo 6004-DDU/2RS

Koyo 6004-DDU/2RS 6004-2RS-C3. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 20mm. Width 12mm. Made in Japan. Replacement ...

12V 5W BA15s Indicator Bulbs

Brake Caliper Boots Yamaha 5R2-25937-00

Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Yamaha OEM 5R2-25937-00, 5R2...

45mm x 41mm x 20mm x 2mm Outer Guide Fork Bushings

Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 20mm. Thickness 2mm. Replacement ...

Brake Pad Retaining Pin Kit - 000099

Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one. Materi...

8mm x 40mm Chrome Rear Sprocket Hexagon Bolts

Chrome plated bolts. Thread 8mm. Length 40mm. Pitch 1.25mm. Spanner size 10mm.

Brake Caliper Boots Yamaha 34X-25937-00

Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Yamaha OEM 34X-25937-00.

6v/12v Ignition Coil Single Output + 1 Terminal (55mm)

6v to 12v ignition coil. 1 spade terminal. Centre-to-centre distance between mounting holes: 55mm. Body length 39mm. Single Output. HT lead ...

25mm x 14mm x 5mm Clutch Arm Rod Oil Seal

Outer diameter 25mm. Inner diameter 14mm. Width 5mm.