Replacement aftermarket part for the following OEM numbers: Yamaha 5JW-13440-00. Honda Marine 15400-PLM-A01PE, 15400-PLM-A02. This will suit...
Inner diameter 30mm. Outer diameter 55mm. Width 1.5mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600063.
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Outer diameter 28.9mm and 32.0mm. Inner diameter 14.25mm. Width 16.25mm. Gasket: 32mm x 14mm x 11.5mm. Sealing ring: 25mm x 14mm x 5mm. Seal...
Upper or Lower depending on whether standard or USD forks. Outer diameter 48.8mm. Inner diameter 46.8mm. Width 20mm. Thickness 1mm.
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made...
Voltage: 12v. Wattage: 1.7w. Base width: 5mm. Width of glass: 6.5mm. Maximum length: 21.8mm. Uses of Medium T6.5 Capless Wedge Bulbs. Medium...
Upper or Lower depending on whether standard or USD forks. Outer diameter 52mm. Inner diameter 48.1mm. Width 12mm. Thickness 1.95mm.
Koyo 6304 DDU. Double sided rubber sealed. Outer diameter 52mm. Inner diameter 20mm. Width 15mm. Made in Japan. Replacement aftermarket part...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Yamaha OEM 4TT-25937-00.
Koyo 60/22-DDU/2RS 60/22-2RS-C3. Double sided rubber sealed. Outer diameter 44mm. Inner diameter 22mm. Width 12mm. Made in Japan. Replacemen...
Outer diameter 28.9mm and 32.0mm. Inner diameter 14.25mm. Width 16.25mm. Made in Taiwan. Replacement aftermarket part for the following OEM ...
This kit includes the following bearings: Bearing 1: ID 30mm x OD 55mm x Thickness 17mm. Bearing 2: ID 30mm x OD 55mm x Thickness 17mm.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 30mm x OD 55mm x Thickness 17mm. Bearing 2: ID 30mm x OD 55mm x Thick...
Outer diameter 44mm. Inner diameter 34.5mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylin...
Outer diameter 44mm. Inner diameter 35mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Piston outer diameter: 41mm. Oil seal: 2.95mm x 3.2mm. Dust seal: 2.0mm x 1.5mm. This kit contains an inner oil seal and an outer dust seal....
As: RC19-032. Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating...
Please Note: HT lead for V-Twins on rear cylinder like the GV700 will require longer lead use SKU: 023734 which is one metre of 7mm. 12v ign...
Please Note: This oil filter does not come with O-rings. Replacement for Hiflofiltro HF148. This will suit the following models as well as t...
