Brand: JT Sprockets. Position: Rear. Tooth Count: 32. JT Part Number: JTR834.32. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 36. JT Part Number: JTR834.36. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR834.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR834.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
Brand: JT Sprockets. Position: Rear. Tooth Count: 35. JT Part Number: JTR834.35. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 31. JT Part Number: JTR834.31. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR834.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...
10 wires with female spade block and bullet connectors. 2 keys included.
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Brand: JT Sprockets. Position: Rear. Tooth Count: 30. JT Part Number: JTR834.30. Type: Standard. Material: Steel. Fitment: Direct replacemen...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
27mm tapering down to 14mm. Length 32cm. Suitable replacement aftermarket part for Yamaha Fizzy OEM numbers: 348-14753-00, 296-14753-02.
Replacement front fork gaiters suitable for the Yamaha FS1-E and many other models with similar fork dimensions. Rubber compound for water r...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
This kit includes the following bearings: Bearing 1: ID 25mm x OD 48mm x Thickness 13mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.
Non-diaphragm tap type. Made in Japan.
Replacement for FEW M48, M76, D92; Daiichi DM78, M76, DM79K, DH31, DN52, DM69; Honda OE 30202-041-015; Yamaha OE 1K8-81321-20, 120-81321-20,...
Please Note: This speedo cable is 780mm/30.5" long so you may require a longer version as listed below: Length: 30.5" (780mm). Clo...
Width 4" (100mm) at widest point. Length 25" (635mm). Replacement aftermarket part for the following Yamaha OEM numbers: 394-21610...
Outer diameter 39mm. Inner diameter 29mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 48mm x Thickness 13mm. Bearing 2: ID 30mm x OD 48mm x Thick...
Genuine NGK LB05F-R red resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...