Outer diameter: 14mm. Inner diameter: 7mm. Length: 38mm. Push-over style. Open both ends. Replacement aftermarket part for the following OEM...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Koyo 6204. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.
Bulbs type MPF (Mini Pre Focus). 15.5mm inner diameter. Three wires. Green = earth. White = low beam. Blue = high beam. This bulb holder tak...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
175mm approx length.
6V 21/3W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable f...
Outer diameter 56mm. Inner diameter 45mm. Width 6mm.
On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
Outer diameter 26mm. Inner diameter 15mm. Width 6mm.
Rear footrest rubbers (Pillion). Length: 80mm. Hole ID: 18.6mm. Replacement aftermarket part for the following OEM numbers: Suzuki 43612-030...
Koyo 6004-DDU/2RS 6004-2RS-C3. Inner diameter 20mm. Outer diameter 42mm. Width 12mm. Made in Japan.
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
Inner diameter 26mm. Outer diameter 37mm. Thickness 10.5mm.
Outer cable length 1970mm. Inner cable length 1140mm. Overhang 70mm. Replacement aftermarket part for Yamaha OEM 443-26341-00, 443-26341-01.
Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan. Replacement aftermarket part ...
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
Fitted with 12V 25/25W MPF bulb. Bulb holder SKU: 018114. 4.5" is the full width of glass. Maximum width: 135mm. OD of visible glass on...
Straight TR4 valve. Same as 90/80-R17. Replacement aftermarket part for the following OEM numbers: Honda 42712-GS4-006, 42712-041-154, 42712...
Replacement aftermarket part for the following OEM numbers: Honda 34905-358-003. and many more TBA.
6V 15/15W. MPF bulb fitting otherwise known as follows: Mini Pre Focus. Miniature Pre-Focus. 18.73mm OD bulb. 14.8mm height of metal body. 4...
Replacement aftermarket part for the following OEM numbers: Honda 34905-053-000, 34905-053-003, 34905-056-671. and many more TBA.
Suitable for motorcycles up to 175cc. 280mm centre to centre of bolt holes. Maximum OD 50mm. Top pin hole ID 10mm - width 18mm. Bottom pin h...
6V 25/25W. MPF bulb fitting otherwise known as follows: Mini Pre Focus. Miniature Pre-Focus. OD of glass: 18mm. Height of glass: 23.5mm. OD ...
Fully covered. Suitable for motorcycles up to 200cc. 280mm centre to centre of bolt holes. Total length 310mm. Maximum OD 45mm. No adjustmen...
Outer diameter 110mm. Width 25mm. How to measure drum brake shoes: Outer Dimension: Preferably use a caliper although a tape measure would g...
