Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF563.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...
45 degree brake light switch with lead. 2 wires with bullet connectors. Comes with spring. Replacement aftermarket part for Yamaha OEM 1A0-8...
Steel sprocket. Replaces JT Sprockets JTR834-48.
Brand: JT Sprockets. Position: Rear. Tooth Count: 37. JT Part Number: JTR834.37. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 32. JT Part Number: JTR834.32. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 36. JT Part Number: JTR834.36. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR834.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR834.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Please note: Some Honda NC50 Express machines were registered in 1979 but built to a later 1980 specification, which uses a different batter...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
Brand: JT Sprockets. Position: Rear. Tooth Count: 35. JT Part Number: JTR834.35. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 31. JT Part Number: JTR834.31. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR834.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...
10 wires with female spade block and bullet connectors. 2 keys included.
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Brand: JT Sprockets. Position: Rear. Tooth Count: 30. JT Part Number: JTR834.30. Type: Standard. Material: Steel. Fitment: Direct replacemen...
27mm tapering down to 14mm. Length 32cm. Suitable replacement aftermarket part for Yamaha Fizzy OEM numbers: 348-14753-00, 296-14753-02.
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Replacement front fork gaiters suitable for the Yamaha FS1-E and many other models with similar fork dimensions. Rubber compound for water r...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
This kit includes the following bearings: Bearing 1: ID 25mm x OD 48mm x Thickness 13mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.
Non-diaphragm tap type. Made in Japan.
Please Note: This speedo cable is 780mm/30.5" long so you may require a longer version as listed below: Length: 30.5" (780mm). Clo...
Width 4" (100mm) at widest point. Length 25" (635mm). Replacement aftermarket part for the following Yamaha OEM numbers: 394-21610...