Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Koyo 6204. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.
Genuine NGK LB05F black resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...
175mm approx length.
Outer diameter 56mm. Inner diameter 45mm. Width 6mm.
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
Outer cable length 1970mm. Inner cable length 1140mm. Overhang 70mm. Replacement aftermarket part for Yamaha OEM 443-26341-00, 443-26341-01.
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
Outer diameter 26mm. Inner diameter 15mm. Width 6mm.
Inner diameter 26mm. Outer diameter 37mm. Thickness 10.5mm.
Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan. Replacement aftermarket part ...
Inner diameter 26mm. Outer diameter 37mm. Thickness 14.5mm.
Fitted with 12V 25/25W MPF bulb. Bulb holder SKU: 018114. 4.5" is the full width of glass. Maximum width: 135mm. OD of visible glass on...
Straight TR4 valve. Same as 90/80-R17. Replacement aftermarket part for the following OEM numbers: Honda 42712-GS4-006, 42712-041-154, 42712...
Suitable for motorcycles up to 175cc. 280mm centre to centre of bolt holes. Maximum OD 50mm. Top pin hole ID 10mm - width 18mm. Bottom pin h...
Fully covered. Suitable for motorcycles up to 200cc. 280mm centre to centre of bolt holes. Total length 310mm. Maximum OD 45mm. No adjustmen...
Outer diameter 110mm. Width 25mm. How to measure drum brake shoes: Outer Dimension: Preferably use a caliper although a tape measure would g...
Top outer length: 980mm. Top free inner length: 62mm. Top fitting: standard ferrule. Bottom 1 fitting: standard ferrule. Top nipple: 6mm x 4...
On, off and reserve positions. Thread 12mm. Pitch 1.25mm. Side outlet. How to measure your fuel tank thread: If your tank has a threaded spi...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This fuel cap does not fit the CB125 J & S 1976 models. Locking version. Outer diameter of the cap body that sits over the tank filler n...
Outer diameter 40mm. Inner diameter 28mm. Width 8mm. This will suit the following models as well as those listed in fitments: Right Hand Sid...
Outer diameter 35mm. Inner diameter 20mm. Width 7mm.
Outer diameter 37mm. Inner diameter 20mm. Width 8mm.
Please Note: This speedo cable is 900mm (35.5") long so you may require a shorter version as listed below: Length: 35.5" (900mm). ...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
