Yamaha IT250 1982 Parts

NGK LB05EMH Black Spark Plug Cap

Fits NGK B series plugs with solid terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal nut. Rubber sheathed. Compact type. Water resistan...

JT Sprockets 50 Tooth Rear Sprocket JTR853.50

Brand: JT Sprockets. Position: Rear. Tooth Count: 50. JT Part Number: JTR853.50. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 43 Tooth Rear Sprocket JTR853.43

Brand: JT Sprockets. Position: Rear. Tooth Count: 43. JT Part Number: JTR853.43. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 49 Tooth Rear Sprocket JTR853.49

Brand: JT Sprockets. Position: Rear. Tooth Count: 49. JT Part Number: JTR853.49. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 40 Tooth Rear Sprocket JTR853.40

Brand: JT Sprockets. Position: Rear. Tooth Count: 40. JT Part Number: JTR853.40. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 51 Tooth Rear Sprocket JTR853.51

Brand: JT Sprockets. Position: Rear. Tooth Count: 51. JT Part Number: JTR853.51. Type: Standard. Material: Steel. Fitment: Direct replacemen...

52mm x 28mm x 5mm Front Sprocket Oil Seal

Outer diameter: 52mm. Inner diameter: 28mm. Width: 5mm.

Engine Gasket Set - 010541

This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...

8mm x 28mm Rear Sprocket Bolts

Flat head countersunk bolts. Thread 8mm. Length 28mm. Pitch 1.25mm.

Steering Head Taper Bearing Kit SSK906R SSH906RR

This kit includes the following bearings and two seals: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x OD 55mm x Thickn...

6V 10/3W Stop & Tail Rear Light Bulbs

40mm x 24mm x 1mm Crank Thrust Washer

Outer diameter 40mm. Inner diameter 24mm. Thickness 1mm. Material: Alloy.

RK 520H-108L Heavy Duty Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.30. Plate thickness (outer): 2.30...

TVH 520-108 Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...

17.00mm x 35.50mm x 2.30mm Clutch Springs

Outer diameter 17.00mm. Length 35.50mm. Thickness 2.30mm. Heavy duty clutch springs.

IRIS 520FB-108 Gold X-Ring Drive Chain

Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...

WRP 24-2023 Crank Shaft Seal Kit

Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...

JT Sprockets 15 Tooth Front Sprocket JTF569.15

Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF569.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...

51 Tooth Rear Sprocket - 004622

Steel sprocket. Replaces JT Sprockets JTR853-51. Internal diameter 152mm. Bolt holes 8.5mm x6. 12 holes in total 8.5mm x6 and 8.3mm x6. Bolt...

JT Sprockets 48 Tooth Rear Sprocket JTR853.48

Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR853.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...

TourMax 6v Ignition Coil Yamaha 35582-31040-00 355-82310-40

Many models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many others may use a longer HT lead than this one at 280mm which is non-r...

NGK B9EG Racing Spark Plug (UK Stock)

Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 9. Reach 19mm (3/4"). Fine wire nickel alloy centre electrode. 0.7-0.8mm gap. ...