Yamaha PW80 1999 Parts

32 Tooth Rear Sprocket JTR834-32

Steel sprocket. Replaces JT Sprockets JTR834-32.

36 Tooth Rear Sprocket JTR834-36

Steel sprocket. Replaces JT Sprockets JTR834-36.

41 Tooth Rear Sprocket JTR834-41

Steel sprocket. Replaces JT Sprockets JTR834-41.

Clutch Friction Plate Yamaha 3E5-16521-00 22F-16521-00

Outer diameter 106mm. Thickness 3mm. Number of pegs 19. Replacement aftermarket part for Yamaha OEM 3E5-16521-00, 116-16521-00, 22F-16521-00...

39 Tooth Rear Sprocket JTR834-39

Steel sprocket. Replaces JT Sprockets JTR834-39.

JT Sprockets 13 Tooth Front Sprocket JTF546.13

Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF546.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 14 Tooth Front Sprocket JTF546.14

Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF546.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 15 Tooth Front Sprocket JTF546.15

Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF546.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 12 Tooth Front Sprocket JTF413.12

Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF413.12. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 37 Tooth Rear Sprocket JTR834.37

Brand: JT Sprockets. Position: Rear. Tooth Count: 37. JT Part Number: JTR834.37. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 32 Tooth Rear Sprocket JTR834.32

Brand: JT Sprockets. Position: Rear. Tooth Count: 32. JT Part Number: JTR834.32. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 36 Tooth Rear Sprocket JTR834.36

Brand: JT Sprockets. Position: Rear. Tooth Count: 36. JT Part Number: JTR834.36. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 41 Tooth Rear Sprocket JTR834.41

Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR834.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 39 Tooth Rear Sprocket JTR834.39

Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR834.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...

NGK BPR6HIX Iridium Spark Plug (Japan)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. 0.6mm fine...

NGK BPR6HS Spark Plug (Japan) (India)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. Standard 2...

NGK BPR6HS Spark Plug (Japan)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Projected insulator. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. Standard 2...

40mm x 31mm x 5mm Alloy Fibre Exhaust Gaskets (x10)

Non-asbestos. Outer diameter 40mm. Inner diameter 31mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...

Rear Sprocket Bolt & Tab Set 80mm Centres 3M5-25412-00-00 4AW-25412-00

Mounting hole centres: 80mm. Centre tab: 53mm. Length: 30mm. Width: 8mm. Includes 2 tabs, 4 bolts and 4 nuts. Once fitted and tight lock the...

TVH 420-098 Standard Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...

Steering Head Ball Bearing Kit - 013087

This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.

Rear Sprocket Rubbers 18A-25364-00-00 22F-25364-00-00

Complete set of rear wheel hub rubber dampers otherwise known as cush drive rubbers. Length 76mm. Width 41mm. Replacement aftermarket part f...

8mm x 13mm Rear Sprocket Nuts

Thread 8mm. Spanner size 13mm. Pitch 1.25mm.

TourMax Fuel Tap Repair Kit - 023532

3 hole seal outer diameter 23mm. Made in Japan.

48.50mm Piston Rings

Outer diameter 48.50mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...

Top End Gasket Set - 010966

WRP 46-1004 Choke Plunger Kit

Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...

Steering Head Taper Bearing Kit SSY080 (Japanese)

Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thick...

NGK LB05F-R 8854 Red 90° 5kΩ Resistor Spark Plug Cap

Genuine NGK LB05F-R red resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...

37 Tooth Rear Sprocket JTR834-37

Steel sprocket. Replaces JT Sprockets JTR834-37.