Length: 93mm. Fitting shape square. Hole size: 20mm.
Takes pipe with a 6mm inner diameter.
Outer diameter 22mm. Inner diameter 8.8mm. Width 6mm.
Code BLB 5679 / 5679B. APF (American Pre Focus). Glass OD 35mm. Total bulb height 55mm.
Complete rear light with wires that have bullet connections. Note: No block connector. Length: 195mm. Height: 75mm. Depth: 70mm. Replacement...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Outer diameter 62mm. Inner diameter 35mm. Width 6mm.
Outer diameter 30mm. Inner diameter 20mm. Width 5mm.
Lens size 190mm x 80mm. Replacement lens for 019343.
Non-asbestos. Outer diameter 44mm. Inner diameter 36mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Please Note: This Indicator is Suitable for both Front and Rear, Left or Right. Stem Length Total 81mm. Thread 8mm. Thread Length Long. Repl...
Code 775677 (T5). APF (American Pre Focus). Glass OD 35mm. Total bulb height 55mm. Retaining flange OD 30mm. Replacement aftermarket part fo...
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
Inner diameter 25mm. Outer diameter 48mm. Width 13mm.
Please Note: These are for the 35mm and 36mm forks and not the 33mm forks found on most KH500 models. Fits fork tube diameter: 35mm/36mm. Pu...
The 14mm bush kit will be required for the Yamaha RD250 - RD400 models, look for our SKU number: 019917. Replacement aftermarket part for th...
Yamaha thread. Left hand mirror has right hand thread. Right hand mirror has left hand thread. Glass outer diameter 110mm. 140mm stem length...
Non-diaphragm tap type. Made in Japan.
This cap is not suitable for SE "Special" models. Outer diameter of the cap body that sits over the tank filler neck: 40mm. Total ...
Please Note: This Indicator is suitable for both front, left or right but has a very short length of thread. It would be better for some mod...
For Low Top Type Carburettors. Top outer throttle cable length: 795mm. Bottom outer throttle cable length: 320mm. Bottom outer carb cables f...
Outer diameter 134mm. Outer diameter including teeth 148mm. Inner diameter 116mm. Thickness 2.8mm. Number of pegs 12. Width of pegs 14mm. Eq...
Outer diameter 52mm. Inner diameter 27mm. Width 5mm.
RK is the leading manufacturer of OEM motorcycle drive chain to all major Japanese manufactures. With over 40 years of supply to the largest...
Shaft size: 19mm. Number of splines: 27. Length from end of toe to end of knuckle: 290mm. Replacement aftermarket part for the following OEM...
