Steel sprocket. Replaces JT Sprockets JTR834-48.
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR834.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
4 wires with female spade block connector. 2 keys included.
Length 67mm. Width 42mm. 54mm between fixing hole centres. Replacement aftermarket part for Yamaha OEM 1UY-25852-00-00, 2GU-25852-00-00, 4L0...
Replacement aftermarket part for Yamaha OEM 241-16341-01, 451-16342-00, 90506-07066, 353-16396-00, 93503-16010, 132-16346-00, 90113-06013, 9...
Length: 32.5" (825mm). Clock fit: screw over 11mm. Tacho drive end: screw over 15mm. Inner type: square/square.
Inner diameter 26mm. Outer diameter 37mm. Thickness 10.5mm.
Non-diaphragm tap type. Made in Japan.
Please Note: This speedo cable is 780mm/30.5" long so you may require a longer version as listed below: Length: 30.5" (780mm). Clo...
Inner diameter 30mm. Outer diameter 48mm. Width 14mm.
Note: The Fizzy FS1/FS1E used different condensers throughout models, so please check the image as you may need our SKU: 005012 with a singl...
Suitable for Yamaha models. Piston outer diameter 38mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only ...
Shaft size: 13mm. Replacement aftermarket lever corresponding to the following Yamaha lever-arm references. Please check the 13mm shaft size...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
Replacement for FEW M48, M76, D92; Daiichi DM78, M76, DM79K, DH31, DN52, DM69; Honda OE 30202-041-015; Yamaha OE 1K8-81321-20, 120-81321-20,...
6v Universal Rectifier. Single bolt mounting. 2 wires with spade connectors. Plastic body. If this product is out of stock you can also use ...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Some bikes have one single pull throttle cable while others have two which are: Throttle Cable A or 1 = (Pull). Throttle Cable B or 2 = (Pus...
Left hand handlebar switch. Lights on, high-low, indicator and horn switches. 11 wires. Fits 7/8" handlebars.
Bore size 46.00mm. Gudgeon pin outer diameter 12mm. Crown height 17.5mm. Piston length 48.5mm. Ring peg position 28mm. 2 stroke. With ports....
Many models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many others may use a longer HT lead than this one at 280mm which is non-r...
Steel sprocket. Replaces JT Sprockets JTR834-49.
Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR834.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...
