Non-diaphragm tap type. Made in Japan.
39mm is the outside diameter of your carburettor intake. Overall length including rubber 69mm. Length of filter 49mm. OD of largest end 61mm...
Replacement front sprocket oil seal, fitted around the gearbox output shaft behind the front sprocket. This seal helps prevent engine or tra...
Everything you need is included in this easy to fit 12v indicator buzzer kit. Fit after the indicator relay and connect the red wire to the ...
Yamaha thread. Left hand mirror has right hand thread. Right hand mirror has left hand thread. Please note that mirrors are always shipped v...
Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
Note: The compact diameter of 11T and 12T sprockets does not allow for bolt hole machining. Please use an appropriate circlip for secure ins...
Yamaha thread. Left hand mirror has right hand thread. Right hand mirror has left hand thread. Black plastic body. Chrome stem. Length of st...
Includes all bearings and seals. Heavy duty tapered roller bearings. Direct replacement for OEM bearings. Upgrade replacement for ball style...
These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
Outer diameter 12.7mm. Length 48.5mm. Spring length 48.6mm. TourMax MSB-115. Made in Japan.
C-Max brand. Single bolt hole mount. Outer diameter 75mm. 116 dB. Made in Japan. All buyers please be aware that all horns/hooters supplied ...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with both rivet and split links. This ma...
Height 37mm. Width 60mm. Replacement for Hiflofiltro HF143, HF142. This filter does not come with an O-ring. This will suit the following mo...
Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF1263.12. Type: Standard. Material: Steel. Fitment: Direct replacem...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF1263.13. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF1263.14. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF1263.15. Type: Standard. Material: Steel. Fitment: Direct replacem...
Thickness: 1.6mm. Number of pegs: 20. Width of pegs: 8mm. Outer diameter: 125mm. Inner diameter without teeth: 101mm. Inner diameter includi...
Some bikes have one single pull throttle cable while others have two which are: Throttle Cable A or 1 = (Pull). Throttle Cable B or 2 = (Pus...
Works on 12v and 6v systems. Replaces SSR-201, MS5D-191/361/611, RC18-025/003 & 21-2988. If this item is out of stock you can use Honda ...
Outer diameter (including pegs): 134mm. Outer diameter (without pegs): 123mm. Inner diameter: 99mm. Width of pegs: 14mm. Number of pegs: 10....
Steel sprocket. Replaces JT Sprockets JTR843-54.
Fits NGK D series plugs with threaded terminals. 90 degree elbow. 10-12mm. Resistor type rated at 5kΩ. Terminal stud. Water resistant, vibr...
