Yamaha SR500 S 1992 Parts

JT Sprockets 57 Tooth Rear Sprocket JTR839.57

Brand: JT Sprockets. Position: Rear. Tooth Count: 57. JT Part Number: JTR839.57. Type: Standard. Material: Steel. Fitment: Direct replacemen...

6 Wire Ignition Switch - 006769

6 wires with male spade block connector. 2 keys included.

JT Sprockets 19 Tooth Front Sprocket JTF1587.19

Brand: JT Sprockets. Position: Front. Tooth Count: 19. JT Part Number: JTF1587.19. Type: Standard. Material: Steel. Fitment: Direct replacem...

Hendler 20 Tooth Front Sprocket

Steel sprocket. Replaces JT Sprockets JTF587-20.

Tacho Cable Yamaha 1JK-83560-02 30X-83560-01 3YF-83560-01 3AJ-83560-01 1VJ-83560-01

Length: 34.5" (885mm). Clock fit: screw over 11mm. Tacho drive end: push in 19mm. Inner type: square/square. Replacement aftermarket pa...

RK 428-130L XSO XW-Ring Heavy Duty Gold Drive Chain

Suitable for Sport, Touring and Off-Road Use. XW-Ring Chain. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (o...

Steering Head Ball Bearing Kit - 013087

This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.

8mm x 13mm Rear Sprocket Nuts

Thread 8mm. Spanner size 13mm. Pitch 1.25mm.

12V 21/5W Red Stop & Tail Rear Light Bulbs

With Staggered Pins.

12V BA9s Blue LED Side Light Bulbs (Pair)

Air Cut Off Valve Set - 016040

Outer diameter 30mm. Set is enough for 1 carburettor.

16.90mm x 43.00mm x 2.30mm Clutch Springs

Outer diameter 16.90mm. Length 43.00mm. Thickness 2.30mm. Heavy duty clutch springs.

IRIS 428RX-130 Nickel Super Heavy Drive Chain

This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...

DID 428D-130L Gold Standard Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

Steering Head Taper Bearing Kit SSY080 (Japanese)

Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thick...

NGK LB05F-R 8854 Red 90° 5kΩ Resistor Spark Plug Cap

Genuine NGK LB05F-R red resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...

RK 428-130L HSB Heavy Duty Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

Con Rod Kit - 008504

Brake Cable - 013394

RK 428-130L HSB Heavy Duty Gold Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

Moto Oil Filter to Replace Hiflofiltro HF145, Champion X302

Please Note: This oil filter does not come with O-rings. Replacement for Hiflofiltro HF145, Champion X302. This will suit the following mode...

53 Tooth Rear Sprocket - 004671

Steel sprocket. Replaces JT Sprockets JTR839-53.

NGK BP7ES Spark Plug (UK Stock)

Thread 14mm x hex 13/16" x pitch 1.25mm. Projected insulator. Heat range 7. Reach 19mm (3/4"). Standard 2.5mm copper core centre e...

Regulator Rectifier Yamaha 2J2-81960-A1

68mm between bolt hole centres. 6 wires. Replacement aftermarket part for Yamaha OEM 2J2-81960-A1. Regulator/Rectifier Fitting InstructionsW...

JT Sprockets 55 Tooth Rear Sprocket JTR839.55

Brand: JT Sprockets. Position: Rear. Tooth Count: 55. JT Part Number: JTR839.55. Type: Standard. Material: Steel. Fitment: Direct replacemen...