Straight TR4 valve.
Brand cross reference: Vesrah VD947, EBC 181, EBC 245, Ferodo FDB2018, SBS671, DP617. You may need more than a single pair of pads if you ha...
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Upper or Lower depending on whether standard or USD forks. Outer diameter: 47mm. Inner diameter: 43.1mm. Width: 12mm. Thickness: 1.95mm. Rep...
Outer diameter 47mm. Inner diameter 28mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600701 (Front lef...
Non-asbestos. Outer diameter 42mm. Inner diameter 34mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Thread: 14mm (M14). Thread pitch: 1.50mm. Plug with copper washer for the oil pan. Replacement aftermarket part for the following OEM number...
On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
Outer diameter: 22mm. Inner diameter: 12mm. Width: 5.5mm.
Mounting hole centres: 66mm and 79mm. Length: 38mm. Complete with O-Rings. Also known as carburettor intake manifold rubbers. Made in Japan....
Inner diameter 43mm. Outer diameter 55mm. Thickness 13.5mm.
Koyo 6004-DDU/2RS 6004-2RS-C3. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 20mm. Width 12mm. Made in Japan. Replacement ...
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one. Materi...
Outer diameter 42mm. Inner diameter 33mm. Depth 4mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Koyo 6003DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 17mm. Width 10mm. Made in Japan.
Outer diameter 35mm. Inner diameter 21mm. Width 6mm.
This lever fits many models on the right hand side as a brake lever & on the left hand side as a clutch or brake. Colour: Alloy. Alterna...
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
This lever fits many models on the right hand side as a brake lever & on the left hand side as a clutch or brake. This left or right han...
Outer diameter 46.5mm. Inner diameter 42.5mm. Width 25mm.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45132-MAK-003 (lar...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MAK-003 (sma...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 43mm x OD 55mm x Thickness 9mm. Push-in type fork dust s...
Replacement aftermarket part for the following OEM numbers: Suzuki 57620-49101, 57620-49100. Yamaha 5Y1-83912-00, 3FY-83912-00, 3FY-83912-01...
Inner diameter 43mm. Outer diameter 55mm. Thickness 9mm.
Outer diameter 30mm. Inner diameter 20mm. Width 7mm.
