Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Some bikes have one single pull throttle cable while others have two which are: Throttle Cable A or 1 = (Pull). Throttle Cable B or 2 = (Pus...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
This wheel bearing kit uses premium quality Japanese Koyo bearings.
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
Height 37mm. Width 60mm. Replacement for Hiflofiltro HF143, HF142. This filter does not come with an O-ring. This will suit the following mo...
Two Pins. As fitted to Kawasaki and late Yamaha models. Reference: FE246BH, FE218BH, 066500-4010, 066500-4020Replacement aftermarket part fo...
Includes all the parts you need for one caliper. OEM replacement, meets or exceeds OEM specs. Works Racing Parts (WRP)The WRP brand relies o...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Brand cross reference: 275; SBS 728. You may need more than a single pair of pads if you have twin discs. Goldfren AD HH sintered brake pads...
Thickness: 1.6mm. Number of pegs: 20. Width of pegs: 8mm. Outer diameter: 125mm. Inner diameter without teeth: 101mm. Inner diameter includi...
Brand cross reference: 275, SBS 728. You may need more than a single pair of pads if you have twin discs. The Goldfren S33 street sintered c...
Performance Upgrade: Replaces worn, damaged parts with, in many cases, upgraded materials like high-performance interface gasket material fo...
Outer diameter (including pegs): 134mm. Outer diameter (without pegs): 123mm. Inner diameter: 99mm. Width of pegs: 14mm. Number of pegs: 10....
Replacement aftermarket part for the following OEM numbers: Yamaha 2JX-14451-00. This will suit the following models as well as those listed...
Thread 12mm x hex 18mm x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre electrode. 0.7...
Replacement aftermarket part for the following OEM numbers: Yamaha 3UH-E3440-00, 5H0-13440-00, 5H0-13440-09. This will suit the following mo...
Steel sprocket. Replaces JT Sprockets JTR842-52.
Steel sprocket. Replaces JT Sprockets JTR842-50.
Steel sprocket. Replaces JT Sprockets JTR842-37.
Bend the steel wire to suit or use your original if need be and hook to the switch. Brake light switch with lead. 2 wires with bullet connec...
69mm between bolt hole centres. 4 pins. Made in Japan. Replacement aftermarket part for Yamaha OEM 3XC-81960-00, 1JK-81960-A0, 1JK-81960-A1,...
Made in Japan.
Electrical connection: 4 pins. Connector sleeve: Female. Voltage: 12v. Rated current: 30A. Replaces: G8MS-S35, ACA1211-2, ACA1121, CA1A-DC12...
