Steel sprocket. Replaces JT Sprockets JTR843-49.
Steel sprocket. Replaces JT Sprockets JTR843-53.
Bend the steel wire to suit or use your original if need be and hook to the switch. Brake light switch with lead. 2 wires with bullet connec...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 7. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Steel sprocket. Replaces JT Sprockets JTR843-51.
Steel sprocket. Replaces JT Sprockets JTR843-50.
Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR843.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 50. JT Part Number: JTR843.50. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 51. JT Part Number: JTR843.51. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Outer diameter: 52mm. Inner diameter: 28mm. Width: 5mm.
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Mounting hole centres: 80mm. Centre tab: 53mm. Length: 30mm. Width: 8mm. Includes 2 tabs, 4 bolts and 4 nuts. Once fitted and tight lock the...
This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.
Outer diameter 40mm. Inner diameter 24mm. Thickness 1mm. Material: Alloy.
Outer diameter 17.00mm. Length 35.50mm. Thickness 2.30mm. Heavy duty clutch springs.
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thick...
Outer diameter 71.00mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF1263.17. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF1263.13. Type: Standard. Material: Steel. Fitment: Direct replacem...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Steel sprocket. Replaces JT Sprockets JTR843-48.
Replacement aftermarket part for the following OEM numbers: Yamaha 207-81326-10-00, 207-81326-90-00. and many more TBA. This will suit the f...
Many models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many others may use a longer HT lead than this one at 280mm which is non-r...
Brand: JT Sprockets. Position: Rear. Tooth Count: 49. JT Part Number: JTR843.49. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Bore size 70.00mm. Gudgeon pin outer diameter 18mm. Crown height 25mm. Piston length 73mm. Ring peg position 38mm. 2 stroke. With ports. Pri...
Brand: JT Sprockets. Position: Rear. Tooth Count: 53. JT Part Number: JTR843.53. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 7. Reach 19mm (3/4"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm g...
