Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR832.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 46. JT Part Number: JTR832.46. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 45. JT Part Number: JTR832.45. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR832.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 6. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Non-asbestos. Outer diameter 40mm. Inner diameter 31mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.
Non-diaphragm tap type. Made in Japan.
Outer diameter 48.50mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thick...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...
Replacement for FEW M48, M76, D92; Daiichi DM78, M76, DM79K, DH31, DN52, DM69; Honda OE 30202-041-015; Yamaha OE 1K8-81321-20, 120-81321-20,...
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
Genuine NGK LB05F-R red resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
Bore size 47.00mm. Gudgeon pin outer diameter 12mm. Crown height 24mm. Piston length 56mm. Ring peg position 32.5mm. 2 stroke. Without ports...
Bore size 48.00mm. Gudgeon pin outer diameter 12mm. Crown height 24mm. Piston length 56mm. Ring peg position 32.5mm. 2 stroke. Without ports...
Bore size 47.50mm. Gudgeon pin outer diameter 12mm. Crown height 24mm. Piston length 56mm. Ring peg position 32.5mm. 2 stroke. Without ports...
Made in Japan. Replacement aftermarket part for the following OEM numbers: Yamaha 296-81325-20-00, 296-81325-90-00, 104-81326-20-00, 116-813...
Many models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many others may use a longer HT lead than this one at 280mm which is non-r...
Brand: JT Sprockets. Position: Rear. Tooth Count: 41. JT Part Number: JTR832.41. Type: Standard. Material: Steel. Fitment: Direct replacemen...
