Yamaha TY80 1984 Parts

11 Tooth Front Sprocket - 003015

Steel sprocket. Sprocket retainer - SKU: 002934 and sprocket nuts - SKU: 002904 may be required.

13 Tooth Front Sprocket - 003135

Steel sprocket. Replaces JT Sprockets JTF563-13.

15 Tooth Front Sprocket - 003409

Steel sprocket. Replaces JT Sprockets JTF563-15.

JT Sprockets 14 Tooth Front Sprocket JTF563.14

Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF563.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 13 Tooth Front Sprocket JTF563.13

Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF563.13. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 15 Tooth Front Sprocket JTF563.15

Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF563.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...

6v AC Ignition Coil Single Output + 1 Wire (55mm)

Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...

Hendler 6v AC Ignition Coil Single Output (55mm)

Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...

JT Sprockets 16 Tooth Front Sprocket JTF563.16

Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF563.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...

39 Tooth Rear Sprocket - 003866

Steel sprocket. Replaces JT Sprockets JTR832-39.

41 Tooth Rear Sprocket - 004012

Steel sprocket. Replaces JT Sprockets JTR832-41.

48 Tooth Rear Sprocket - 004501

Steel sprocket. Replaces JT Sprockets JTR832-48.

NGK BR6HIX Iridium Spark Plug (UK Stock)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...

JT Sprockets 39 Tooth Rear Sprocket JTR832.39

Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR832.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 46 Tooth Rear Sprocket JTR832.46

Brand: JT Sprockets. Position: Rear. Tooth Count: 46. JT Part Number: JTR832.46. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 45 Tooth Rear Sprocket JTR832.45

Brand: JT Sprockets. Position: Rear. Tooth Count: 45. JT Part Number: JTR832.45. Type: Standard. Material: Steel. Fitment: Direct replacemen...

JT Sprockets 48 Tooth Rear Sprocket JTR832.48

Brand: JT Sprockets. Position: Rear. Tooth Count: 48. JT Part Number: JTR832.48. Type: Standard. Material: Steel. Fitment: Direct replacemen...

NGK B6HS Spark Plug (UK Stock)

Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 6. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...

Engine Gasket Set - 010476

This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...

30mm x 48mm x 14mm Steering Head Bearing

Inner diameter 30mm. Outer diameter 48mm. Width 14mm.

IRIS 420RX-106 Nickel Super Heavy Drive Chain

This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...

IRIS 420RXP-106 Gold Super Heavy Drive Chain

This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. The RXP ch...

Contact Points FEW Ref. M48, M76, D92

Replacement for FEW M48, M76, D92; Daiichi DM78, M76, DM79K, DH31, DN52, DM69; Honda OE 30202-041-015; Yamaha OE 1K8-81321-20, 120-81321-20,...

RK 420-106L Standard Drive Chain

Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...

Top End Gasket Set - 010968

RK Pro-MX 420-106L MXZ Heavy Duty Gold Drive Chain

Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...

MTX 420HD-106 Gold Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...

47.00mm Piston Kit - 008802

Bore size 47.00mm. Gudgeon pin outer diameter 12mm. Crown height 24mm. Piston length 56mm. Ring peg position 32.5mm. 2 stroke. Without ports...

48.00mm Piston Kit - 008831

Bore size 48.00mm. Gudgeon pin outer diameter 12mm. Crown height 24mm. Piston length 56mm. Ring peg position 32.5mm. 2 stroke. Without ports...

47.50mm Piston Kit - 008816

Bore size 47.50mm. Gudgeon pin outer diameter 12mm. Crown height 24mm. Piston length 56mm. Ring peg position 32.5mm. 2 stroke. Without ports...