Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Great for mini and vintage bikes, the 428NZ is a great non-sealed option that will give you greater performance than the OEM non-sealed chai...
Height 45mm. Width 38mm. Replacement for Hiflofiltro HF141, HF981. This filter does not come with an O-ring. This will suit the following mo...
Outer diameter (including pegs): 134mm. Outer diameter (without pegs): 123mm. Inner diameter: 99mm. Width of pegs: 14mm. Number of pegs: 10....
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.7-0.8mm gap. Genuine NGK spark ...
Replacement aftermarket part for the following OEM numbers: Yamaha 20P-E4450-00, 3C1-E4450-00. This will suit the following models as well a...
Replacement aftermarket part for the following OEM numbers: Yamaha: 5D7-H3922-10-00. and many more TBA. These will suit the following models...
Steel sprocket. Replaces JT Sprockets JTR839-53.
NOTE: This switch is not supplied with a model-specific moulded plug. It has male spade terminals fitted and matching female terminals inclu...
Steel sprocket. Replaces JT Sprockets JTF262-14.
12V 7AH CCA 105. Terminals: 4 (2 positive + 2 negative). Complete with battery terminals & connections. Battery can be rotated 180 degre...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Brand: JT Sprockets. Position: Rear. Tooth Count: 53. JT Part Number: JTR839.53. Type: Standard. Material: Steel. Fitment: Direct replacemen...
Outer diameter 123mm. Thickness 1.5mm. Number of pegs 24.
Outer diameter (including teeth) 134mm. Thickness 3.1mm. Number of pegs 10. Replacement for Vesrah VP2007.
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF1550.14. Type: Standard. Material: Steel. Fitment: Direct replacem...
Inner diameter 30mm. Outer diameter 55mm. Width 1.5mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600063.
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Outer diameter 47mm. Inner diameter 28mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600701 (Front lef...
Thread 8mm. Spanner size 12mm.
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
2 bolt hole type. 34mm between bolt hole centres. Replacement aftermarket part for the following OEM numbers: Honda 95014-92100, 23811-230-0...
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made...
If these bulbs are showing out of stock you could always use SKU: 018217 which includes one amber and one clear 12V 23W BA15s bulb or use SK...
Voltage: 12v. Wattage: 1.7w. Base width: 5mm. Width of glass: 6.5mm. Maximum length: 21.8mm. Uses of Medium T6.5 Capless Wedge Bulbs. Medium...
