Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x OD 55mm x Thick...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Outer diameter 18mm. Inner diameter 12mm. Width 5mm.
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41.1mm. Width 11.8mm. Thickness 1.95mm. Repla...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Inner diameter: 41mm. Outer diameter: 53mm. Thickness: 4.50mm/13.50mm. Replacement aftermarket part for for the following OEM numbers: Yamah...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Koyo 6303DDU. Upgraded from B6303Z. Also known as: 6303LLUC3, 2ASU68. Double sided rubber sealed. Outer diameter: 47mm. Inner diameter: 17mm...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Koyo 6203DDU. Upgraded from B6203ZC3. Double sided rubber sealed. Outer diameter: 40mm. Inner diameter: 17mm. Width; 12mm. Made in Japan. Re...
Koyo 6001. Outer diameter 28mm. Inner diameter 12mm. Width 8mm. Made in Japan.
Thread: 14mm (M14). Thread pitch: 1.50mm. Plug with copper washer for the oil pan. Replacement aftermarket part for the following OEM number...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Voltage: 12v. Wattage: 3.4w. Base width: 9.5mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 caples...
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made...
Piston outer diameter 38mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
