39mm is the outside diameter of your carburettor intake. Overall length including rubber 44mm.
Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
Yamaha thread. Left hand mirror has right hand thread. Right hand mirror has left hand thread. Glass outer diameter 100mm. 120mm stem length...
39mm is the outside diameter of your carburettor intake. Overall length including rubber 69mm. Length of filter 49mm. OD of largest end 61mm...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Replacement front sprocket oil seal, fitted around the gearbox output shaft behind the front sprocket. This seal helps prevent engine or tra...
Note: The compact diameter of 11T and 12T sprockets does not allow for bolt hole machining. Please use an appropriate circlip for secure ins...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Great for mini and vintage bikes, the 428NZ is a great non-sealed option that will give you greater performance than the OEM non-sealed chai...
Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF1263.12. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF1263.16. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF1263.14. Type: Standard. Material: Steel. Fitment: Direct replacem...
Height 37mm. Width 60mm. Replacement for Hiflofiltro HF143, HF142. This filter does not come with an O-ring. This will suit the following mo...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF1263.15. Type: Standard. Material: Steel. Fitment: Direct replacem...
Thickness: 1.6mm. Number of pegs: 20. Width of pegs: 8mm. Outer diameter: 125mm. Inner diameter without teeth: 101mm. Inner diameter includi...
Outer diameter (including pegs): 134mm. Outer diameter (without pegs): 123mm. Inner diameter: 99mm. Width of pegs: 14mm. Number of pegs: 10....
Replacement aftermarket part for the following OEM numbers: Yamaha 3UH-E3440-00, 5H0-13440-00, 5H0-13440-09. This will suit the following mo...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...
Steel sprocket. Replaces JT Sprockets JTR842-52.
Outer length: 1170mm. Outer top fitting: standard ferrule. Outer bottom fitting: 9mm stepped ferrule. Inner overhang: 147mm. Inner top nippl...
