Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF1263.12. Type: Standard. Material: Steel. Fitment: Direct replacem...
Height 37mm. Width 60mm. Replacement for Hiflofiltro HF143, HF142. This filter does not come with an O-ring. This will suit the following mo...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF1263.16. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF1263.14. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF1263.15. Type: Standard. Material: Steel. Fitment: Direct replacem...
Thickness: 1.6mm. Number of pegs: 20. Width of pegs: 8mm. Outer diameter: 125mm. Inner diameter without teeth: 101mm. Inner diameter includi...
Single bolt hole mount. Outer diameter 75mm. 100 dB. All buyers please be aware that all horns/hooters supplied by us are marked but not nec...
Outer diameter (including pegs): 134mm. Outer diameter (without pegs): 123mm. Inner diameter: 99mm. Width of pegs: 14mm. Number of pegs: 10....
Fits NGK D series plugs with threaded terminals. 90 degree elbow. 10-12mm. Resistor type rated at 5kΩ. Terminal stud. Water resistant, vibr...
Replacement aftermarket part for the following OEM numbers: Yamaha 3UH-E3440-00, 5H0-13440-00, 5H0-13440-09. This will suit the following mo...
Steel sprocket. Replaces JT Sprockets JTR842-52.
Steel sprocket. Replaces JT Sprockets JTR842-50.
Steel sprocket. Replaces JT Sprockets JTR842-37.
For use with bulbs up to 10 watt.
Brake light switch with lead. Lead length 12cm. 2 wires with bullet connectors. Comes with spring. Replacement aftermarket part for Yamaha O...
Brake light switch with lead. Small push-in type. 2 wires with bullet connectors.
Top 1 outer length: 995mm. Outer top 1 fitting: 90' bend, 10mm adjuster (1.00mm pitch). Outer bottom 1 fitting: 6mm screw over. Top 1 inner ...
Thread Diameter: 12mm. Thread Pitch: 1.25mm. Hex Size: 18mm. Terminal Type: Threaded Stud. Reach: 19mm (3/4"). Gap: 0.7mm. Non-resistor...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.
Fits cam chains supplied by us only.
Outer cable 1200mm. Overhang 100mm. Replacement aftermarket part for Yamaha OEM 1M1-26341-00, 498-26341-00, 498-26341-01, 15A-26341-00, 498-...
Outer diameter 12mm. Inner diameter 9.5mm. Stem 4.5mm.
Outer diameter 46mm. Inner diameter 37mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
