Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Everything you need is included in this easy to fit 12v indicator buzzer kit. Fit after the indicator relay and connect the red wire to the ...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
WRP CV Boots are manufactured from high-performance DCR66 rubber. Installation is straightforward using the supplied easy fit mounting clamp...
Outer diameter 18mm. Inner diameter 12mm. Width 5mm.
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
Bulbs type MPF (Mini Pre Focus). 15.5mm inner diameter. Three wires. Green = earth. White = low beam. Blue = high beam. This bulb holder tak...
Outer diameter 14mm. Inner diameter 7mm. Length 38mm. Push-over style. Open both ends.
6v to 12v ignition coil. 1 spade terminal. Centre-to-centre distance between mounting holes: 55mm. Body length 39mm. Single Output. HT lead ...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Voltage: 12v. Wattage: 3.4w. Base width: 9.5mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 caples...
Change the CV boot while out on the trail without having to disassemble the CV axle. Expandable yet durable material - specifically designed...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
3 hole seal outer diameter 23mm. Made in Japan.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-166-016.