Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 9. Reach 19mm (3/4"). Fine wire nickel alloy centre electrode. 0.7-0.8mm gap. ...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.
2 bolt hole type. 34mm between bolt hole centres. Replacement aftermarket part for the following OEM numbers: Honda 95014-92100, 23811-230-0...
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
Fits fork tube diameter: 30mm. Push-over internal diameter: 40mm. Overall length: 38.6mm. Type: Push over fork dust seal. Replacement afterm...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 30mm x OD 40.5mm x Thickness 10.5mm. Push-over type fork...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thick...
Genuine NGK LB05F-R red resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
Many models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many others may use a longer HT lead than this one at 280mm which is non-r...
