Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
This wheel bearing kit uses premium quality Japanese Koyo bearings.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
These steering head tapered bearing kits are provided by Hendler to the same specification as the All Balls kits. While the quality is compa...
Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...
Koyo 6304SH2-9TC3. Outer diameter 52mm. Inner diameter 20mm. Width 15mm. Made in Japan.
Note: The compact diameter of 11T and 12T sprockets does not allow for bolt hole machining. Please use an appropriate circlip for secure ins...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF1263.17. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 12. JT Part Number: JTF1263.12. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF1263.14. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF1263.16. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 13. JT Part Number: JTF1263.13. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF1263.15. Type: Standard. Material: Steel. Fitment: Direct replacem...
Thickness: 1.6mm. Number of pegs: 20. Width of pegs: 8mm. Outer diameter: 125mm. Inner diameter without teeth: 101mm. Inner diameter includi...
Models including Fizzy FS1E, YB100, C50, C70, NC50, PA50 and many other models use a longer HT lead than this one at 300mm. If your original...
Outer diameter (including teeth) 134mm. Thickness 4.1mm. Number of pegs 10. Replacement for Vesrah VP2006.
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 9. Reach 19mm (3/4"). Fine wire nickel alloy centre electrode. 0.7-0.8mm gap. ...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
2 bolt hole type. 34mm between bolt hole centres. Replacement aftermarket part for the following OEM numbers: Honda 95014-92100, 23811-230-0...
This kit includes the following bearings: Bearing 1: ID 25mm x OD 43mm x Thickness 11mm. Bearing 2: ID 30mm x OD 48mm x Thickness 12mm.
