Yamaha YZ125 1975 Parts

35mm x 15mm x 11mm Wheel Bearing Koyo 6202DDU

Koyo 6202DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 15mm. Width 11mm. Made in Japan. Replacement aftermarket part ...

14mm x 7mm x 38mm Kickstart Lever Rubbers 26352-16402 95011-51000

Outer diameter: 14mm. Inner diameter: 7mm. Length: 38mm. Push-over style. Open both ends. Replacement aftermarket part for the following OEM...

12mm x 1.50mm Magnetic Oil Drain Sump Plug 92066-1174 90340-12006

Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...

42mm x 15mm x 13mm Wheel Bearing Koyo 6302DDU

Koyo 6302DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 15mm. Width 13mm. Made in Japan. Replacement aftermarket part ...

20mm x 8mm x 40mm Gear Lever Rubbers

Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.

Alloy Clutch Lever - 015050

175mm approx length.

Hendler 34.5mm x 22mm x 1mm Crank Thrust Washers

Outer diameter 34.5mm. Inner diameter 22mm. Thickness 1mm. Material: Alloy.

14.50mm x 36.00mm x 2.00mm Clutch Springs

Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.

37mm x 12mm x 12mm Wheel Bearing 96150-63010 Koyo 6301DDU

Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan. Replacement aftermarket part ...

TourMax 3.92mm x 12.6mm FNL-M1 Float Valve without Wire Clip

Replacement aftermarket part for following OEM numbers: - Please Note: This is just for the needle valve as per image and does not include t...

30mm x 40.5mm x 10.5mm Fork Oil Seals 92049-1049 51153-0801

Inner diameter: 30mm. Outer diameter: 40.5mm. Thickness: 10.5mm. Replacement aftermarket part for the following OEM numbers: Kawasaki 44009-...

Alloy Clutch Lever with Rubber Tip

25mm x 14mm x 5mm Clutch Arm Rod Oil Seal

Outer diameter 25mm. Inner diameter 14mm. Width 5mm.

TourMax Swing Arm Bearing & Bush Kit Yamaha 90386-18028-00 401-22123-00 214-22123-00

Made in Japan. Replacement aftermarket part for Yamaha OEM 90386-18028-00, 401-22123-00, 214-22123-00.

40mm x 28mm x 8mm Crank Oil Seal

Outer diameter 40mm. Inner diameter 28mm. Width 8mm. This will suit the following models as well as those listed in fitments: Right Hand Sid...

45mm x 38mm x 5mm Alloy Fibre Exhaust Gaskets (x10)

Non-asbestos. Outer diameter 45mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...

25mm x 43mm x 11mm Steering Head Bearing

Inner diameter 25mm. Outer diameter 43mm. Width 11mm.

52mm x 25mm x 15mm Crank Bearing Koyo 6205-C3

Koyo 6205-C3. Outer diameter 52mm. Inner diameter 25mm. Width 15mm. Made in Japan.

38mm x 26mm x 5mm Front Sprocket Oil Seal

Outer diameter 38mm. Inner diameter 26mm. Width 5mm.

52mm x 25mm x 15mm Crank Bearing Koyo 6205-C4

Koyo 6205-C4. Outer diameter 52mm. Inner diameter 25mm. Width 15mm. Made in Japan.

WRP 24-1072 Crank Shaft Bearing & Seal Kit

Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...

25mm x 17mm x 4mm Kickstart Oil Seal

Outer diameter 25mm. Inner diameter 17mm. Width 4mm.

30mm x 48mm x 12mm Steering Head Bearing

Inner diameter 30mm. Outer diameter 48mm. Width 12mm.

45mm x 38mm x 5mm Alloy Fibre Exhaust Gasket

Non-asbestos. Outer diameter 45mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...

21mm x 12mm x 4mm Gear Lever Oil Seal 93101-12173-00

Outer diameter: 21mm. Inner diameter: 12mm. Width: 4mm. Replacement aftermarket part for the following OEM numbers: Honda 91201-035-015, 912...

NGK LB05F 8051 Black 90° 5kΩ Resistor Spark Plug Cap

Genuine NGK LB05F black resistor spark plug cap, designed for use with 14mm spark plugs that have an exposed threaded terminal stud. The 90Â...

17 Tooth Front Sprocket JTF1263-17

Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...

19mm x 12mm x 5mm Gear Lever Oil Seal

Outer diameter 19mm. Inner diameter 12mm. Width 5mm. Replacement aftermarket part for the following OEM numbers: Sherco M126. Suzuki 09285-1...

40mm x 25mm x 8mm Crank Oil Seal

Outer diameter 40mm. Inner diameter 25mm. Width 8mm. This will suit the following models as well as those listed in fitments: Left Hand Side...

15 Tooth Front Sprocket JTF1263-15

Steel sprocket ID including splines: 16mm. ID without splines: 20mm. Gap between each spline: 4mm. Spline width: 4mm. Bolt hole centres: 34m...