Yamaha YZ80 1978 Parts

14mm x 7mm x 38mm Kickstart Lever Rubbers 26352-16402 95011-51000

Outer diameter: 14mm. Inner diameter: 7mm. Length: 38mm. Push-over style. Open both ends. Replacement aftermarket part for the following OEM...

20mm x 8mm x 40mm Gear Lever Rubbers

Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.

47mm x 20mm x 14mm Crank Bearing - 007540

Koyo 6204. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.

47mm x 20mm x 14mm Crank Bearing - 007540

Koyo 6204. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.

8mm x 35mm Rear Sprocket Studs

Thread 8mm. Length 35mm. Pitch 1.25mm.

Alloy Clutch Lever - 015050

175mm approx length.

12mm x 1.50mm Magnetic Oil Drain Sump Plug 92066-1174 90340-12006

Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...

Con Rod Kit - 008475

This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.

22mm x 12mm x 5.5mm Gear Lever Oil Seal 93102-12106-00

On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...

36mm Brake Shoe Springs Thickness 8.25mm

36mm between hook centres. Thickness 8.25mm.

26mm x 15mm x 6mm Kickstart Oil Seal

Outer diameter 26mm. Inner diameter 15mm. Width 6mm.

37mm x 12mm x 12mm Wheel Bearing 96150-63010 Koyo 6301DDU

Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan. Replacement aftermarket part ...

14.50mm x 36.00mm x 2.00mm Clutch Springs

Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.

Brake Shoes FSB733 SBS2034 VB223 VB235 Y506

Outer diameter: 130mm. Width: 28mm. Replaces: VB223, VB233, VB235, 506, Y506, Y517, FSB733, M307, M503, 0307-CP, MF451, MCS953, SBS2034, GF1...

TourMax 3.92mm x 12.6mm FNL-M1 Float Valve without Wire Clip

Replacement aftermarket part for following OEM numbers: - Please Note: This is just for the needle valve as per image and does not include t...

27mm x 39mm x 10.5mm Fork Oil Seals

Inner diameter 27mm. Outer diameter 39mm. Thickness 10.5mm.

Alloy Clutch Lever with Rubber Tip

Front Sprocket Retainer - 002934

225/250-16 Inner Tube with TR4 Valve

Straight TR4 valve.

NGK BR8EIX Iridium Spark Plug (UK Stock)

Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...

350/375/410-14 Inner Tube with TR4 Valve

Straight TR4 valve.

28mm x 12mm x 8mm Wheel Bearing Koyo 6001DDU

Koyo 6001DDU. Double sided rubber sealed. Outer diameter 28mm. Inner diameter 12mm. Width 8mm. Made in Japan.

45mm x 38mm x 5mm Alloy Fibre Exhaust Gaskets (x10)

Non-asbestos. Outer diameter 45mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...

40mm x 28mm x 8mm Crank Oil Seal

Outer diameter 40mm. Inner diameter 28mm. Width 8mm. This will suit the following models as well as those listed in fitments: Right Hand Sid...

25mm x 43mm x 11mm Steering Head Bearing

Inner diameter 25mm. Outer diameter 43mm. Width 11mm.

37mm x 20mm x 8mm Wheel Oil Seal

Outer diameter 37mm. Inner diameter 20mm. Width 8mm.

95mm x 20mm Brake Shoes - 001991

Outer diameter 95mm. Width 20mm. How to measure drum brake shoes: Outer Dimension: Preferably use a caliper although a tape measure would gi...

35mm x 20mm x 7mm Crank Oil Seal

Outer diameter 35mm. Inner diameter 20mm. Width 7mm.

45mm x 38mm x 5mm Alloy Fibre Exhaust Gasket

Non-asbestos. Outer diameter 45mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...

30mm x 48mm x 12mm Steering Head Bearing

Inner diameter 30mm. Outer diameter 48mm. Width 12mm.