Outer diameter: 14mm. Inner diameter: 7mm. Length: 38mm. Push-over style. Open both ends. Replacement aftermarket part for the following OEM...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Thread 12mm. Pitch 1.50mm. Full length 20mm. Width of head 17mm spanner. Thread length 10mm or 13mm including magnet. Replacement aftermarke...
Koyo 6204. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.
Outer diameter 26mm. Inner diameter 15mm. Width 6mm.
Fits NGK B series plugs with threaded terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal stud. Replacement aftermarket part for the foll...
36mm between hook centres. Thickness 8.25mm.
Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan. Replacement aftermarket part ...
On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
Outer diameter: 130mm. Width: 28mm. Replaces: VB223, VB233, VB235, EBC 506, Y506, Y517, FSB733, M307, M503, 0307-CP, MF451, MCS953, SBS2034,...
Replacement aftermarket part for following OEM numbers: - Please Note: This is just for the needle valve as per image and does not include t...
Outer diameter 37mm. Inner diameter 21mm. Width 7mm. Although this seal looks different to the original it fits perfectly and does what its ...
Straight TR4 valve.
Replacement aftermarket part for Yamaha OEM Yamaha 4GY-83912-00, 1B2-H3912-00.
Inner diameter: 30mm. Outer diameter: 42mm. Thickness: 10.5mm. Replacement aftermarket part for the following OEM numbers: Suzuki 51153-4842...
Non-asbestos. Outer diameter 45mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Koyo 6001DDU. Double sided rubber sealed. Outer diameter 28mm. Inner diameter 12mm. Width 8mm. Made in Japan.
Outer diameter 95mm. Width 20mm. How to measure drum brake shoes: Outer Dimension: Preferably use a caliper although a tape measure would gi...
Inner diameter 25mm. Outer diameter 43mm. Width 11mm.
Outer diameter 37mm. Inner diameter 20mm. Width 8mm.
Outer diameter 40mm. Inner diameter 28mm. Width 8mm. This will suit the following models as well as those listed in fitments: Right Hand Sid...
Performance Upgrade: Replaces worn, damaged parts with, in many cases, upgraded materials like high-performance interface gasket material fo...
Outer diameter 35mm. Inner diameter 20mm. Width 7mm.
Fits fork tube diameter: 30mm. Push-over internal diameter: 44mm. Overall length: 30.2mm. Type: Push over fork dust seal.
Outer diameter of the cap body that sits over the tank filler neck: 51mm. Screw-on fine thread.
