Thread 12mm. Pitch 1.50mm. Full length 20mm. Width of head 17mm spanner. Thread length 10mm or 13mm including magnet. Replacement aftermarke...
Koyo 6302DDU. Double sided rubber sealed. Outer diameter 42mm. Inner diameter 15mm. Width 13mm. Made in Japan. Replacement aftermarket part ...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Koyo 6204. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.
On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
Outer diameter 26mm. Inner diameter 15mm. Width 6mm.
Straight TR4 valve. Same as 90/80-R17. Replacement aftermarket part for the following OEM numbers: Honda 42712-GS4-006, 42712-041-154, 42712...
Straight TR4 valve.
Replacement aftermarket part for Yamaha OEM Yamaha 4GY-83912-00, 1B2-H3912-00.
Inner diameter: 30mm. Outer diameter: 42mm. Thickness: 10.5mm. Replacement aftermarket part for the following OEM numbers: Suzuki 51153-4842...
Outer diameter 40mm. Inner diameter 28mm. Width 8mm. This will suit the following models as well as those listed in fitments: Right Hand Sid...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Non-asbestos. Outer diameter 45mm. Inner diameter 38mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Koyo 6001DDU. Double sided rubber sealed. Outer diameter 28mm. Inner diameter 12mm. Width 8mm. Made in Japan.
Inner diameter 25mm. Outer diameter 43mm. Width 11mm.
Outer diameter 95mm. Width 20mm. How to measure drum brake shoes: Outer Dimension: Preferably use a caliper although a tape measure would gi...
Performance Upgrade: Replaces worn, damaged parts with, in many cases, upgraded materials like high-performance interface gasket material fo...
Outer diameter 37mm. Inner diameter 20mm. Width 8mm.
Outer diameter 15mm. Inner diameter 4.8mm. Width 4mm.
Outer diameter 35mm. Inner diameter 20mm. Width 7mm.
On and off positions. 34mm between bolt hole centres. 6mm rear outlet. Takes pipe with a 6mm inner diameter. Made in Japan.
Fits fork tube diameter: 30mm. Push-over internal diameter: 44mm. Overall length: 30.2mm. Type: Push over fork dust seal.
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Replacement aftermarket part for the following OEM numbers: Suzuki 57420-14300. Yamaha 23X-83922-01, 1B2-H3922-00, 23X-83922-00, 3M2-83922-0...
Outer diameter 115mm. Thickness 1.2mm. Number of pegs 23. Replacement aftermarket part for the following OEM numbers: Yamaha 25716-32410-00,...
