On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
Technosynthese hydraulic fluid specially designed for any type of forks upside down or conventional. Contains an anti-friction additive spec...
Base: 9mm. Glass Width: 9.60mm. Glass Length:15mm.
Koyo 6202DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 15mm. Width 11mm. Made in Japan to OEM specification. Replacem...
Thread 8mm. Spanner size 12mm.
Base width: 5mm. Glass width: 6.2mm. Glass length: 17.8mm.
Width at base 8.80mm. Width of glass 9.60mm. Total length 24.10mm. These bulbs will also fit the number plate light on some models such as t...
Replacement part for the following OEM numbers: Honda 34901-MAT-611, 33110-S1A-G51, 33110-SMG-E01HE, 34901-KEY-700.
2 bolt hole type. 34mm between bolt hole centres.
Kelvin is a measurement by colour temperature of the colour produced to a halogen bulb. Colour temperature refers to how warm or cool a bulb...
Non-asbestos. Outer diameter 42mm. Inner diameter 34mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Thread 8mm. Length 40mm. Pitch 1.25mm.
Koyo 6305 C3. Outer diameter 62mm. Inner diameter 25mm. Width 17mm. Made in Japan to OEM specification. Replacement part for the following O...
Width at base 9mm. Length 25.5mm.
Outer diameter 42mm. Inner diameter 33mm. Depth 4mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Base width: 9.3mm. Glass width: 9.6mm. Glass length: 24.8mm.
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one.
Koyo 6000. Outer diameter 26mm. Inner diameter 10mm. Width 8mm. Made in Japan to OEM specification.
Specially designed for any type of upside down or conventional forks including Showa, Kayaba, Ohlins and WP. Reduced internal friction, spec...
Outer diameter 42mm. Inner diameter 32mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylinde...
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
Brand cross reference: EBC 377, Vesrah VD9026, SBS 810, Ferodo FDB2184, Dunlopad DP967. You may need more than a single pair of pads if you ...
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
