Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Suitable for fork seals with 58mm outer diameter. Thickness 1.6mm. This will suit the following models as well as those listed in fitments: ...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Made in Japan.
This oil filter remover will only fit filters supplied by Motorcycle Products.
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Please Note: With some Yamaha models this single brake caliper piston kit is one of the two smaller pistons fitted to 4 piston type calipers...
Fits 10mm (3/8") inner diameter fuel line. Filter Inlet OD: 10.5mm. Filter Outlet OD: 10.5mm. Filter Inlet ID: 8mm. Filter Outlet ID: 8...
Koyo 6001. Outer diameter 28mm. Inner diameter 12mm. Width 8mm. Made in Japan.
Upper or Lower depending on whether standard or USD forks. Outer diameter: 47mm. Inner diameter: 43.1mm. Width: 12mm. Thickness: 1.95mm. Rep...
Thread: 14mm (M14). Thread pitch: 1.50mm. Plug with copper washer for the oil pan. Replacement aftermarket part for the following OEM number...
Non-asbestos. Outer diameter 42mm. Inner diameter 34mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
Length: 37" (940mm). Longer version at 1090mm use our SKU: 015979. Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square...
Voltage: 12v. Wattage: 3.4w. Base width: 8mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 capless ...
As used in motorcycle and other auto vehicle speedo, tacho clocks, dashboards, rear lights, marker lights, indicators. Base width: 9.3mm. Gl...
On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
Inner diameter 43mm. Outer diameter 55mm. Thickness 13.5mm.
Please Note: Longer version at 1090mm for fitments & OEM numbers listed. Standard length at 940mm use our SKU: 015962. Clock fit: screw-...
