Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Suitable for fork seals with 58mm outer diameter. Thickness 1.6mm. This will suit the following models as well as those listed in fitments: ...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Type: K1. 4.40mm x 13.60mm. Can use with or without clip. Made in Japan. Replacement aftermarket part for the following OEM numbers: (Note: ...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Koyo 6001. Outer diameter 28mm. Inner diameter 12mm. Width 8mm. Made in Japan.
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Fits 10mm (3/8") inner diameter fuel line. Filter Inlet OD: 10.5mm. Filter Outlet OD: 10.5mm. Filter Inlet ID: 8mm. Filter Outlet ID: 8...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Upper or Lower depending on whether standard or USD forks. Outer diameter: 47mm. Inner diameter: 43.1mm. Width: 12mm. Thickness: 1.95mm. Rep...
This 32006JRRS bearing comes with the seal as shown in the image. Koyo 32006JRRS. Inner diameter: 30mm. Outer diameter: 55mm. Width: 17mm. M...
Voltage: 12v. Wattage: 3.4w. Base width: 9.5mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 caples...
Length: 37" (940mm). Longer version at 1090mm use our SKU: 015979. Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square...
Thread: 14mm (M14). Thread pitch: 1.50mm. Plug with copper washer for the oil pan. Replacement aftermarket part for the following OEM number...
Push-in type. Inner diameter: 43mm. Outer diameter: 55mm. Fitting depth: 4.5mm. Total height: 13.5mm. Fork dust seal dimensions represent th...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
Please Note: With some Yamaha models this single brake caliper piston kit is one of the two smaller pistons fitted to 4 piston type calipers...
Performance upgrade use our SKU: 036428 HiFlo HF303RC. Replaces: Champion: COF303, X303. Bosch: 3323. Emgo: 10-82230. Fram: PH6017A. Hiflofi...