As: RC19-032. Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating...
12V 8.6AH CCA 165. Terminals: 4 (2 positive + 2 negative). Complete with battery terminals & connections. Battery can be rotated 180 deg...
Steel sprocket. Replaces JT Sprockets JTR1876-43.
Steel sprocket. Replaces JT Sprockets JTR1876-45.
Endless cam chain. Length: 118 links. Rivet link available use our SKU: 008357. Made in Japan. Fitting Endless Cam Chains – Important Inst...
Steel sprocket. Replaces JT Sprockets JTF586-17.
Steel sprocket. Replaces JT Sprockets JTF586-16.
Pins: 6. Made in Japan. Replacement aftermarket part for the following OEM numbers: Shindengen: SH678-11. Yamaha: 4XY-81960-00-00, 1SD-H1960...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 10. 19mm (3/4") reach. 0.6mm fine wire iridium centre e...
Brand: JT Sprockets. Position: Rear. Tooth Count: 45. JT Part Number: JTR1876.45. Type: Standard. Material: Steel. Fitment: Direct replaceme...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF1586.16. Type: Standard. Material: Steel. Fitment: Direct replacem...
Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF580.16RB. Type: RB (Rubber Damped). Material: Steel with rubber da...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
Inner diameter 30mm. Outer diameter 55mm. Width 1.5mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600063.
Fits cam chains supplied by us only.
Made in Japan. This set includes the following items: 1 x bearing OD 24mm x ID 17mm x length 20mm. 1 x shaft OD 17mm x ID 12mm x length 30mm...
This kit includes the following bearings: Top bearing: ID 30mm x OD 55mm x W 15mm. Bottom bearing: ID 31mm x OD 55mm x W 15mm.
Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...
Outer diameter 16.80mm. Length 54.00mm. Thickness 2.30mm. Heavy duty clutch springs.
Outer diameter 44mm. Inner diameter 34.5mm. Depth 4mm. Flat Copper Exhaust Header Gaskets fit with flat side of the gasket against the cylin...
Suitable for Yamaha models. Piston outer diameter 30mm. Thinner Seal: T: 2.10mm x W: 2.20mm. Thicker Seal: T: 3.20mm x W: 3.20mm. Each kit c...
Please note: This brake pad pin kit is supplied exactly as shown in the image. Depending on the caliper design, some applications use one re...
Suitable for Yamaha models. Piston outer diameter 38mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only ...
Outer diameter 44mm. Inner diameter 35mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Suitable for Yamaha models. Piston outer diameter 27mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only ...
Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
