Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Fits 8mm (5/16") inner diameter fuel line. Filter Inlet OD: 8.5mm. Filter Outlet OD: 8.5mm. Filter Inlet ID: 6mm. Filter Outlet ID: 6mm...
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Voltage: 12v. Wattage: 1.70W. Base width: 9.5mm. Maximum length: 27mm. T10 (also known as W5W or 501). Uses of Small T10 Capless Wedge Bulbs...
Koyo 6001. Outer diameter 28mm. Inner diameter 12mm. Width 8mm. Made in Japan.
Koyo 32006JR. Inner diameter 30mm. Outer diameter 55mm. Width 17mm. Made in Japan. Replacement aftermarket part for the following OEM number...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 25mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x OD 55mm x Thick...
This clutch slave cylinder repair kit for the listed Yamaha models includes two slave cylinder piston seals, a clutch pushrod oil seal, spri...
Use with our SKU: 006904. Includes push rod, bushing and boot. Brass bush outer diameter 10mm. Brass bush length 10mm. Rod length 41.25mm. M...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
Outer diameter 245mm. Inner diameter 115mm. 6 bolt holes. 8mm bolt holes. Non-countersunk. Made in Japan.
Outer diameter 56mm. Inner diameter 45mm. Width 6mm.
Performance upgrade use our SKU: 036428 HiFlo HF303RC. Replaces: Champion: COF303, X303. Bosch: 3323. Emgo: 10-82230. Fram: PH6017A. Hiflofi...
Thread: 14mm (M14). Thread pitch: 1.50mm. Plug with copper washer for the oil pan. Replacement aftermarket part for the following OEM number...
Voltage: 12v. Wattage: 3.4w. Base width: 9.5mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 caples...
Please Note: With some Yamaha models this single brake caliper piston kit is one of the two smaller pistons fitted to 4 piston type calipers...
On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
Made in Japan. 3 x roller 15mm x 12mm. 3 x cap 6.2mm x 14.1mm. 3 x spring. Replacement aftermarket part for Yamaha OEM 1J7-15583-00-00, 1J7-...
