Outer diameter: 14mm. Inner diameter: 7mm. Length: 38mm. Push-over style. Open both ends. Replacement aftermarket part for the following OEM...
10mm spline size. 105mm length between centre of toe plate and centre of spline. 125mm length between centre of heel plate and centre of spl...
Outer diameter 110mm. Width 25mm. Springs available separately SKU: 001876. Replaces the following brand numbers: Agpa M301. Cobreq 0304-CP....
30mm between hook centres. Thickness 6.85mm.
Replacement front sprocket oil seal, fitted around the gearbox output shaft behind the front sprocket. This seal helps prevent engine or tra...
Outer diameter: 50mm. Outer diameter of the cap body that sits over the tank filler neck: 30mm. Push and twist fuel tank cap. Replacement af...
Please Note: This taillight is fitted with a 12v bulb so unless you have your original 6v bulb please order our SKU: 018262 which are BAY15D...
Fits Honda 14mm Spline Open. Shaft size: 14mm. Lever length: 205mm. Replacement aftermarket part for the following Honda OEM numbers: Honda ...
60mm between hole centres.
Width: 127mm. Height: 90mm. Depth: 63mm. Compatible with Stanley H-120, HM-12RC, HM-15RC. Replacement aftermarket part for the following OEM...
Foam air filter pods are ideal for off-road use where there's lots of dust or mud flying about, typically in motocross racing & trails. ...
Complete set of rear wheel hub rubber dampers otherwise known as cush drive rubbers. Length 68mm. Width 37mm. Replacement aftermarket part f...
6V 21/3W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable f...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Outer diameter: 50mm. Outer diameter of the cap body that sits over the tank filler neck: 30mm. Push and twist fuel tank cap with keys. Repl...
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
Length of smooth section: 50mm. Thread for mounting: 8mm. Thread pitch: 1.25mm. Length of thread: 26mm . This indicator stem fits front righ...
Note: This retainer plate is not suitable for Honda VT125 C models due to differences in the gearbox output shaft splines. However you could...
This indicator stem fits front right, front left, rear right & rear left. 8mm thread for mounting x 25mm length. 15mm actual stem length...
These stems do not Include fixing screws please use your originals or purchase from a local hardware store. Please note: some modification m...
Length of smooth section: 70mm. Thread for mounting: 10mm. Thread pitch: 1.25mm. This indicator stem fits front right, front left, rear righ...
Koyo 6203-DDU/2RS 6203-2RS-C3. For non-sealed bearing use SKU: 007534. Inner diameter 17mm. Outer diameter 40mm. Width 12mm. Made in Japan. ...
Length 95mm. 14mm round fitting.
Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan. Replacement aftermarket part ...
Koyo 6305 C4. Outer diameter 62mm. Inner diameter 25mm. Width 17mm. Made in Japan. The internal differences between C3 and C4 bearings is cl...
Suitable for motorcycles up to 200cc. Chrome body and spring. Centre to centre of mounting holes: 265mm. Top mounting hole ID: 12mm. Bottom ...
