Honda C90 Z2 1977 Parts

RK 428-100L HSB Heavy Duty Gold Drive Chain

Non-Sealed economical chain for heavy duty usage. Made in Japan. Specifications Plate thickness (inner): 2.00. Plate thickness (outer): 2.00...

MTX 428HD-100 Gold Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...

DID 428HD-100L Heavy Duty Drive Chain

Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...

16 Tooth Front Sprocket - 003442

Steel sprocket. Replaces JT Sprockets JTF264-16.

Condenser 30250-035-006 654-81325-20

Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 30250-035-005, 30250-035-006, 30250-041-004, 30250-041-005,...

13 Tooth Front Sprocket - 003075

Steel sprocket. Replaces JT Sprockets JTF264-13.

15 Tooth Front Sprocket - 003301

Steel sprocket. Replaces JT Sprockets JTF264-15.

17 Tooth Front Sprocket - 003536

Steel sprocket. Replaces JT Sprockets JTF264-17.

14 Tooth Front Sprocket - 003168

Steel sprocket. Replaces JT Sprockets JTF264-14. Replacement aftermarket part for Honda OEM 23801-121-000, 23801-KF9-505, 23801-107-760, 238...

6v 2-Pin 23 Watt Indicator Relay 38300-GF0-405

For use with bulbs up to 23 watt. B = Battery. L = Indicator. If the shape of your relay is rectangle you can still fit this round one which...

JT Sprockets 16 Tooth Front Sprocket JTF264.16

Brand: JT Sprockets. Position: Front. Tooth Count: 16. JT Part Number: JTF264.16. Type: Standard. Material: Steel. Fitment: Direct replaceme...

6v 3-Pin 23 Watt Indicator Relay

For use with bulbs up to 23 watt. L = turn switch, X = positive, P = dash light.

JT Sprockets 15 Tooth Front Sprocket JTF264.15

Brand: JT Sprockets. Position: Front. Tooth Count: 15. JT Part Number: JTF264.15. Type: Standard. Material: Steel. Fitment: Direct replaceme...

42 Tooth Rear Sprocket - 004039

Steel sprocket. ID: 54mm. PCD (Pitch Circle Diameter): 70mm. Bolt hole OD: 8.50mm. Number of bolt holes: 4. Pitch: 428. Replaces JT Sprocket...

JT Sprockets 17 Tooth Front Sprocket JTF264.17

Brand: JT Sprockets. Position: Front. Tooth Count: 17. JT Part Number: JTF264.17. Type: Standard. Material: Steel. Fitment: Direct replaceme...

JT Sprockets 14 Tooth Front Sprocket JTF264.14

Brand: JT Sprockets. Position: Front. Tooth Count: 14. JT Part Number: JTF264.14. Type: Standard. Material: Steel. Fitment: Direct replaceme...

Rectifier Honda 31700-358 31700-292 31700-046 31700-351

Please Note: Wire connection block may need modifying by unclipping wires with a small flathead screwdriver and swapping or use your old blo...

6v DC Ignition Coil Single Output + 2 Wires (90mm)

Please Note: The HT lead at 380mm might be too short for your C90 so please add to your order one metre of HT lead SKU: 023734. 6v DC igniti...

Engine Gasket Set - 009879

This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...

8 Wire Ignition Switch - 006637

8 wires with female spade block connector. 2 keys included.

7 Wire Ignition Switch - 006638

7 wires with female spade block connector. 2 keys included.

NGK D6HA, D6HS Spark Plug (Japan)

Thread 12mm x hex 18mm x pitch 1.25mm. Heat range 6. 12.7mm (1/2") reach. Special design. 0.7-0.8mm gap.

Heavy Duty Centre Stand Honda C90 50500-046-670B

Pivot pin required for this stand SKU: 012954. Fits several Honda C90 models Check Fitments. Replacement aftermarket part for Honda OEM 5050...

Sprocket Carrier Stub Axle Honda 42303-041-000 90307-001-000

Total length: 54.10mm. Length from under head to end of thread: 40.40mm. Fits sprocket carrier SKU: 002850. Replacement aftermarket part for...

Engine Oil Seal Kit - 007888

Fork Repair Kit with Grease Nipple Bolts

Sprocket Carrier Honda C50, C70 & C90 (Includes Sprocket & Bearing)

Includes sprocket and bearing.

Brake Cable 58100-26000 45450-GB4-600 22F-26341-02

Replacement aftermarket part for the following OEM numbers: Yamaha 22F-26341-00, 22F-26341-01, 22F-26341-02. Suzuki 58100-26000, 58100-01722...

Kickstart Shaft Honda 28251-086-701

Overall length 195mm. Replacement aftermarket part for Honda OEM 28251-086-701.

Steering Head Ball Bearing Kit - 013072

This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x Thickness 12.5mm...