Steel sprocket. ID: 54mm. PCD (Pitch Circle Diameter): 70mm. Bolt hole OD: 8.50mm. Number of bolt holes: 4. Pitch: 428. Replaces JT Sprocket...
Please Note: Wire connection block may need modifying by unclipping wires with a small flathead screwdriver and swapping or use your old blo...
Please Note: The HT lead at 380mm might be too short for your C90 so please add to your order one metre of HT lead SKU: 023734. 6v DC igniti...
This engine gasket set contains most of the gaskets required for an engine rebuild. This gasket set does not include any oil seals other tha...
8 wires with female spade block connector. 2 keys included.
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
7 wires with female spade block connector. 2 keys included.
Thread 12mm x hex 18mm x pitch 1.25mm. Heat range 6. 12.7mm (1/2") reach. Special design. 0.7-0.8mm gap.
Total length: 54.10mm. Length from under head to end of thread: 40.40mm. Fits sprocket carrier SKU: 002850. Replacement aftermarket part for...
Includes sprocket and bearing.
Outer diameter 110mm. Width 25mm. Springs available separately SKU: 001876. Replaces the following brand numbers: Agpa M301. Cobreq 0304-CP....
Replacement aftermarket part for the following OEM numbers: Yamaha 22F-26341-00, 22F-26341-01, 22F-26341-02. Suzuki 58100-26000, 58100-01722...
Please Note: This taillight is fitted with a 12v bulb so unless you have your original 6v bulb please order our SKU: 018262 which are BAY15D...
Overall length 195mm. Replacement aftermarket part for Honda OEM 28251-086-701.
Width: 127mm. Height: 90mm. Depth: 63mm. Compatible with Stanley H-120, HM-12RC, HM-15RC. Replacement aftermarket part for for the following...
Pivot pin required for this stand SKU: 012954. Fits several Honda C90 models Check Fitments. Replacement aftermarket part for Honda OEM 5050...
This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x Thickness 12.5mm...
Thread 8mm. Spanner size 13mm. Pitch 1.25mm.
Fits cam chains supplied by us only.
This indicator stem fits front right, front left, rear right & rear left. 8mm thread for mounting x 25mm length. 15mm actual stem length...
Made in Japan. This kit includes the following bearings: Bearing 1: ID 22.5mm x OD 41mm x Thickness 12.5mm. Bearing 2: ID 24mm x OD 41mm x T...
35mm is the outside diameter of your carburettor intake. Filter is 43mm long.
Bosch Type BA20D bulb holder use our SKU: 018112.
