Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Made in Japan. Replaces Honda 45520-MM5-006, 45520-MZ0-760.
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 43mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Voltage: 12v. Wattage: 10w. Maximum width of base: 9.5mm. Maximum width of glass: 15.7mm. Maximum length: 39.3mm. Uses of Large T15 Capless ...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Made in Japan. Replaces Honda 45520-300-000.
Inner diameter 43mm. Outer diameter 54mm. Thickness 11mm.
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Outer diameter 18mm. Inner diameter 8mm. Width 5mm.
This oil filter remover will only fit filters supplied by Motorcycle Products.
Inner diameter 43mm. Outer diameter 54mm. Thickness 13mm.
Voltage: 12v. Wattage: 5w. Base width: 8mm. Maximum width of glass: 10mm. Maximum length: 25.6mm. Uses of Medium T13 Capless Wedge Bulbs. Me...
Thread: 14mm (M14). Thread pitch: 1.50mm. Plug with copper washer for the oil pan. Replacement aftermarket part for the following OEM number...
Upper or Lower depending on whether standard or USD forks. Outer diameter 47mm. Inner diameter 43.1mm. Width 15mm. Thickness 1.95mm. Replace...
Thread diameter 49mm. Supplied with diaphragm. Made in Japan.
Piston outer diameter 38mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Suzuki OEM 69186-04F00. Repl...
Voltage: 12v. Wattage: 3.4w. Base width: 8mm. Glass: 10mm. Maximum length: 26.8mm. Uses of Small T10 Capless Wedge Bulbs. Small T10 capless ...
As used in motorcycle and other auto vehicle speedo, tacho clocks, dashboards, rear lights, marker lights, indicators. Base width: 9.3mm. Gl...
Piston outer diameter 38mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 100 pistons. Fit Japanese bikes onl...
Outer diameter 25mm. Inner diameter 8mm. Width 7mm.
316L stainless steel. Piston outer diameter 38mm. Piston length 31mm. This kit includes a single piston with matching internal oil seal and ...
Note: This cap's OD is 114mm - if yours is 112mm - please search for our SKU: 012495. Outer diameter: 114mm. Outer diameter of the cap body ...
